HVR3700001023FR500 Resistors

Series:	HVR37
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	102 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Pulse Withstanding, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.157" Dia x 0.394" L (4.00mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: HVR3700001023FR500 Application Field and Working Principle

Through hole resistors are some of the most commonly used resistors in electronics. A through hole resistor has two terminals, located on the sides of a ceramic disk, usually made of oxide–ceramic or carbon–granule. Thick film resistors are also known as chip resistors and have three terminals: a post, an anchor, and a conductor.Through hole resistors are very versatile and can be used in a variety of projects. In some cases, they may be used in simple circuits, like in voltage divider circuits or as a current limiting resistor in a circuit. They may also be used in more complex circuits, such as high voltage applications, or as a bypass capacitor.The HVR3700001023FR500 is a through hole resistor manufactured by The Power Semiconductor Corporation. It has a maximum power rating of 10 Watts and is available with various resistance values and tolerance ratings ranging from 0.01 Ohms to 1000 Ohms.The HVR3700001023FR500 is designed to provide excellent performance in all applications. The resistor features high voltage breakdown characteristics, high current handling capability, and low thermal resistance. It also has low ESR and low self-heating. The terminal pins are designed to minimize electrical contact resistance and ensure optimal heat dissipation.The HVR3700001023FR500 is an excellent choice for applications where the precision, accuracy, and reliability are critical. It can be used for a wide variety of applications ranging from precision analog and digital circuits, general-purpose switching and buffer circuits, power management, and digital signal processing. It is suitable for use in automotive electronics, industrial control, consumer electronic products, and medical equipment.The working principle of the HVR3700001023FR500 is based on a simple law of physics known as Ohm\'s Law. This law states that the current through a resistor, measured in amperes (A), is proportional to the voltage across the resistor, measured in volts (V). The resistance of the resistor, measured in ohms (Ω), is equal to the voltage divided by the current. In the case of the HVR3700001023FR500, the resistor is made up of a material that will allow the current to pass through it at a certain rate. The material used dictates the resistance of the resistor. The resistance of the resistor is then further adjusted by adjusting the voltage applied to the resistor. As the voltage across the resistor increases, so too does the current. This current is then used to do work in the circuit, such as powering a motor or a light bulb. The HVR370000103FR500 has a wide range of applications. It can be used to regulate the current in a circuit, allowing it to remain constant regardless of changes in voltage. It can also be used to turn a circuit on and off, allowing the circuit to be controlled remotely. It can also be used to protect circuits from over-voltage and over-current situations. The HVR370000103FR500 is an ideal choice for any project requiring reliable and consistent performance. Its wide range of resistance values, wide operating temperature range, and high power rating make it suitable for a variety of applications. Its two-terminal design makes it easy to install and use.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description