IAGN6-1-51-2.50 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers

An IAGN6-1-51-2.50 Circuit Breaker is an electrical safety device that helps to protect circuit wiring and electrical equipment in the event of a system fault or overload. The device works by automatically tripping and cutting the power to the protected circuit when an overload or fault occurs, thus mitigating the risk of injury or damage from a power surge or an electrical short-circuit. Circuit Breakers are designed to address a variety of power demands, from basic household applications to industrial scale uses.

Application Field

Circuit Breakers are used in almost every electrical application ranging from simple household appliances such as toasters and electric heaters, to complex production and industrial machines. The size and capacity of Circuit Breakers is determined by the current load of the application and dictates the amperage that the Breaker will be able to handle. Individual Circuit Breakers are generally rated with a maximum amperage and must be selected according to local safety codes which dictate what rating is acceptable for the wiring or appliance being served.

Working Principle

Circuit Breakers are designed to protect any electrical circuits or equipment connected to the system. When an overload or fault occurs the Circuit Breaker will trip, quickly cutting power to the protected loads. Manufacturers typically use a time-delay feature that allows an initial burst of current to be safely absorbed. This is especially important when considering large induction or capacitive loads or large start-up currents resulting from electric motors.

Circuit Breakers are usually configured with a toggle switch along with a thermal-magnetic mechanism which is designed to trip the breaker when current exceeds the rated level. In normal operation the current passes through at a consistent level and the breaker will remain locked in place. When the current reaches its rated level, the thermal-magnetic mechanism will open and close to cut the power, thus protecting any connected circuits or equipment.

Different models of Circuit Breakers are available, such as ground-fault Circuit Breakers, which have a different mechanism for the tripping action. These Breakers use a series of resistors and a current transformer to detect ground fault currents and trip the Circuit Breaker when the currents reach a hazardous level.

Conclusion

An IAGN6-1-51-2.50 Circuit Breaker is one type of device that has been designed to provide protection for electric loads, wiring and equipment. The device is designed to operate within specific safety codes and comes in a variety of sizes and ratings depending on the type and sizes of loads to be protected. By automatically interrupting electric power in the event of an overload or fault, the Circuit Breaker helps to provide an added level of safety and efficiency to any electric system or circuit.

The specific data is subject to PDF, and the above content is for reference