IALK1-4-53-14.0-A-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are essential safety devices used in both residential and commercial settings. The IALK1-4-53-14.0-A-01 is a particular type of circuit breaker designed for high current applications. This article will discuss the application field and working principles of this particular circuit breaker.

Application Field of the IALK1-4-53-14.0-A-01 Circuit Breaker

The IALK1-4-53-14.0-A-01 is a type of moulded case circuit breaker (MCCB) that is specifically designed for high current applications. It is typically used in industrial settings where high levels of current may be expected, such as in industrial buildings, factories, power plants, etc. However, the IALK1-4-53-14.0-A-01 can also be used in a residential setting, although in these cases it is usually paired with a lower current-rated device such as a standard household fuse.

The IALK1-4-53-14.0-A-01 is able to handle a high amount of current and can be used in applications with up to 63A current. It is designed for use with 200/240V AC single phase or three-phase power systems, making it suitable for a wide range of applications. It is also suitable for use in hazardous locations due to its high current rating and ability to protect against overloads and short circuits.

Working Principles of the IALK1-4-53-14.0-A-01 Circuit Breaker

The IALK1-4-53-14.0-A-01 operates on the same principles as other circuit breakers. It is designed to protect a circuit from damage due to overcurrents, short circuits, and other faults. When an overcurrent is detected, the circuit breaker trips and interrupts the electrical current, preventing further damage to the circuit. The IALK1-4-53-14.0-A-01 is designed to be able to handle large levels of current, making it suitable for use in commercial and industrial settings where high amounts of current may be expected.

Unlike standard household fuses, which must be replaced after use, the IALK1-4-53-14.0-A-01 can be reset after tripping. This makes it suitable for applications where the device may be required to reset itself numerous times, such as in large industrial plants where high levels of current are expected on a regular basis.

The IALK1-4-53-14.0-A-01 also has the ability to detect whether a fault is caused by an overload or a short circuit. This means that it can more accurately detect and trip on the appropriate type of fault, thus providing better protection for the circuit.

Conclusion

The IALK1-4-53-14.0-A-01 is a type of moulded case circuit breaker designed for high current applications. It is typically used in industrial settings where high current levels may be expected, but can also be used in residential settings with lower current applications. The IALK1-4-53-14.0-A-01 operates on the same principles as other circuit breakers, and is designed to protect circuits from damage due to short circuits, overloads, and other faults. It also has the ability to detect the type of fault, and can be reset after tripping, making it suitable for applications where it may be needed to reset itself multiple times.

The specific data is subject to PDF, and the above content is for reference