ICM-20648 Sensors, Transducers |
|
Allicdata Part #: | 1428-1061-2-ND |
Manufacturer Part#: |
ICM-20648 |
Price: | $ 2.29 |
Product Category: | Sensors, Transducers |
Manufacturer: | TDK InvenSense |
Short Description: | IMU ACCEL/GYRO/TEMP I2C/SPI QFN |
More Detail: | Accelerometer, Gyroscope, Temperature, 6 Axis Sens... |
DataSheet: | ICM-20648 Datasheet/PDF |
Quantity: | 5000 |
5000 +: | $ 2.08118 |
Specifications
Series: | -- |
Part Status: | Active |
Sensor Type: | Accelerometer, Gyroscope, Temperature, 6 Axis |
Output Type: | I²C, SPI |
Operating Temperature: | -40°C ~ 85°C (TA) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Motion sensors and inertial measurement units (IMUs) are essential components of modern navigation and tracking systems. They are used to measure the motion of an object in space from an external reference point. Inertial measurement units typically combine accelerometers, gyroscopes, magnetometers, and other sensors to accurately track the motion of an object in three-dimensional space.The ICM-20648 is a 6-axis inertial measurement unit that combines acceleration and angular rate measurements with a digital motion processor. It has industry leading performance and offers a plethora of features. It is a low-power device and supports a range of power-saving modes.The ICM-20648 integrates three sensors: a 3-axis accelerometer, a 3-axis gyroscope, and a Digital Motion Processor (DMP). The accelerometer measures linear acceleration in three directions. The gyroscope measures angular rate in three directions. The DMP combines the accelerometer and gyroscope sensor outputs to produce an estimate of orientation in three dimensions.The ICM-20648 is designed for a variety of applications, including flight controllers in unmanned aerial vehicles, inertial navigation systems, smartphones, gaming controllers, and wearable devices. It offers superior performance and low power consumption, making it ideal for consumer and industrial applications.The ICM-20648 has advanced features that make it well-suited for dynamic environments. It has a low noise gyroscope and a high signal-to-noise ratio accelerometer. It also has high-resolution synchronization and clock recovery circuits. It supports both digital and serial peripheral interfaces.The working principle of the ICM-20648 is based on measuring the inertial forces acting on the object in motion. The accelerometer and gyroscope measures the linear and angular accelerations experienced by the object. This information is then used to estimate the orientation of the object in space. The DMP combines the accelerometer and gyroscope data to compute a quaternion representation of the orientation of the object relative to a reference frame.The ICM-20648 is well-suited for a variety of motion-sensing applications. It is ideal for industrial and consumer applications that require high-performance and low power consumption. It integrates three sensors to accurately measure the motion of an object in three-dimensional space. The ICM-20648 is a powerful and cost-effective solution for applications such as flight controllers, inertial navigation systems, smartphones, gaming controllers, and wearable devices.The specific data is subject to PDF, and the above content is for reference
Latest Products
FEBFIS1100MESU-IMU6D3X
MULTIFUNCTION SENSORSensor Output
FEBFIS1100MESU_IMU6D3X
MULTIFUNCTION SENSORSensor Output
ADXC1501AWBRGZ-RL
YAW/3-AXIS ACCEL COMBOAccelerometer, Gyr...
IMU480ZA-209
IMU ACCEL/GYRO/MAG 3-AXIS SPIAcceleromet...
IMU280ZA-209
IMU ACCEL/GYRO/MAG 3-AXIS SPIAcceleromet...
AHRS280ZA-200
ATTITUDE HEADING REFERENCE SYSTEAccelero...