ICP-S2.3TN Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are one of the most widely used electrical products in the industry. From consumer electronics to large-scale industries, fuses have been used to protect circuits from dangerously high levels of current that can damage them and create safety hazards. And ICP-S2.3TN is a type of fuse widely used in almost all kinds of industry and it is designed to offer superior protective capability with compact size.

The name ICP-S2.3TN actually stands for the Product Line International Circuit Protection. The TN after the S2.3 stands for time delay, which means the fuse is designed to open after a delay to allow a short period of over current before tripping. It is rated at 250VAC, 2.3A and is suitable for many applications, such as home appliances, industrial machines, lamps, toys, lighting fixtures, safety products, power tools, and many other electronic products.

The working principle of ICP-S2.3TN is pretty simple. Inside there is a thin wire made of metal. This wire is usually referred to as the fuse element. When the current passes through the fuse element, it causes it to heat up. Once it reaches the rated current, the heat will cause the metal to melt. This will break the connection between the two contact points and will cut the power supply.

The melting process usually takes a few seconds and this is what is referred to as time delay. Time delay fuses are designed to give more protection for sensitive and expensive electrical components. For example, it can prevent heavy current caused by a lightning strike to damage the entire circuit board.

When the current is lower or equal to below the threshold, the fuse element will remain intact and keep the circuit uninterrupted.

An important factor of an ICP-S2.3TN is its breaking capacity. It determines the degrees of protection the fuse will provide. For example, if the breaking capacity is too low, it will not trip even with high levels of current. On the other hand, if it is too high, it will trip at very low levels of current. Usually, the breaking capacity of a fuse should be set by a qualified electrician and the fuse has to be tested and certified by relevant authorities before it can be used.

In conclusion, ICP-S2.3TN is a type of fuse designed to provide superior protection for circuits with time delay. It can withstand higher currents and protect circuits from dangerous power surges and lightning strikes. In addition, it must be tested and certified before use to ensure the best safety level.

The specific data is subject to PDF, and the above content is for reference