IDTCV183-2APAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDTCV183-2APAG is a Clock/Timing – Application Specific device. It is a low-power, low-jitter, low-skew, single-supply frequency synthesizer that produces output frequencies up to 1.5 GHz. This device is capable of synthesizing multiple clock frequencies simultaneously by dynamically adjusting the reference, feedback and output frequencies over a wide frequency range of 16.70 to 300.00 MHz.

The IDTCV183-2APAG is primarily used in high-speed digital systems such as telecom, storage, data centers, and network switches. It can also be used in consumer devices such as smartphones, tablets, and audio/visual processors. This device is designed for applications requiring multiple outputs and low jitter clock synchronization.

The IDTCV183-2APAG device is available in a 5x5mm 64-lead QFN package and consists of an internal voltage regulator and PLL. It offers a low-power, low-jitter and low-skew frequency synthesis solution with a maximum operating frequency of 1.5GHz. The device has an integrated 3.3V regulator and can also be used with an external supply voltage up to 5.5V. The device has the ability to lock up to 4 different non-overlapping frequencies. It can be used to generate frequencies up to 1.5GHz with ±200 ppm of accuracy.

The IDTCV183-2APAG device supports one internal reference clock input and four programmable clock outputs. It also supports various clock formats such as LVPECL, LVDS, CMOS and HCSL. The device also supports a low-power suspend mode for low-power applications.

The working principle of the IDTCV183-2APAG device is based on a Phase Locked Loop (PLL) architecture. A reference clock is used as the input signal and is fed into the PLL. The PLL then compares the reference signal to an internal phase detector, which generates an error signal. This error signal is then amplified by a charge pump and filtered by loop filters to form a control signal. The control signal is then used to adjust the frequencies of the oscillator, which generates the output signals.

The IDTCV183-2APAG device can be programmed with frequency and duty cycle settings, both of which are stored in a non-volatile memory. The device can also be programmed with a software interface to allow for quick and easy changes to the clock frequency settings. Once programmed, the device can be used to generate clock outputs with low jitter, low skew, and high accuracy.

In summary, the IDTCV183-2APAG is a low-power, low-jitter, low-skew, single-supply frequency synthesizer that produces output frequencies up to 1.5GHz. It is primarily used in high-speed digital systems and can be used to generate frequencies up to 1.5GHz with ±200 ppm of accuracy. The working principle of the device is based on a Phase Locked Loop (PLL) architecture and can be programmed with frequency and duty cycle settings.

The specific data is subject to PDF, and the above content is for reference