IEG6-28942-1-V

Series:	IEG
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of IEG6-28942-1-V Circuit Breakers

IEG6-28942-1-V is a circuit breaker specifically designed for a variety of applications. It is designed to protect circuits from electrical shocks, damage, and excessive usage. The circuit breaker is available in a wide range of models, all of which are made of a special, highly resistant material to ensure maximum protection. This article will discuss the application field and working principle of IEG6-28942-1-V circuit breakers.

Application Field of IEG6-28942-1-V Circuit Breakers

IEG6-28942-1-V circuit breakers are mainly used in residential and commercial settings. In these settings, they are used as a safety device to prevent damage to circuits should they be exposed to high levels of electricity or usage. They are also used in industrial settings, such as in factories, where high levels of electricity and heavy loads of machinery are present.

Working Principle of IEG6-28942-1-V Circuit Breakers

IEG6-28942-1-V circuit breakers are primarily designed to protect circuits from overloading and other electrical damage. At the core of its design is an automatic switch that will trip when an unsafe current exceeds the predefined limit for the circuit. This switch is a spring-loaded mechanism, meaning it will reset itself once the excess current is removed. While this circuit breaker is mainly designed to protect circuits, it can also be used to protect the user by cutting power to a device when it is no longer in use.

How IEG6-28942-1-V Circuit Breakers Are Installed

IEG6-28942-1-V circuit breakers are relatively easy to install. They require only a few basic components and some electrical wiring to be installed properly. First, the circuit breaker is connected to the source of power with two wires. Then, a pair of copper straps is connected to the circuit breaker, which connects to the wires in the circuit. Finally, the circuit is completed by attaching a ground wire to the circuit breaker. This completes the installation process.

Testing of IEG6-28942-1-V Circuit Breakers

Once installed, it is important to test the circuit breaker to make sure it is working properly. This can be done using a few simple procedures. The first is to simply apply power to the circuit breaker. Then, power is immediately removed. This is done to test the circuit breaker’s ability to cut power from the source when needed. If the circuit breaker fails to cut power, it is likely malfunctioning and needs to be replaced. The second procedure involves turning the circuit breaker off and then back on again. This is done to make sure the circuit breaker is able to reset itself after it has been tripped. Finally, the circuit breaker is tested by turning it off and on multiple times. This is done to make sure the circuit breaker is able to reset itself after multiple trips.

Conclusion

IEG6-28942-1-V circuit breakers are a reliable safety device designed to protect circuits from overloading and other electrical damage. They are designed to be used in both residential and commercial settings and are relatively easy to install. Once installed, it is important to test the circuit breaker to make sure it is working properly. This can be done by applying power to the circuit breaker and then turning it off and on multiple times. With regular testing, these circuit breakers can help ensure the safety of people and machines from damaging levels of electricity.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description