IEG62-35905-20-V Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices designed to protect electric systems, circuits, and equipment from harm due to overloading or short-circuiting. They are devices that interrupt the current flow when a fault or overload is detected. The IEG62-35905-20-V is one type of circuit breaker which provides protection for low-voltage alternating current systems. This type of circuit breaker is designed for industrial applications, providing reliable and easy operation.

The IEG62-35905-20-V is a compact circuit breaker with a voltage rating of 20 V, and a rated current of 16 A. This particular circuit breaker is designed for use with three-phase systems, such as motors, generators, or pumps. It has a robust housing and is designed for easy installation. The device is UL and CSA approved, making it suitable for industrial use.

The working principle of the IEG62-35905-20-V circuit breaker is based on an overload protector and a manual switch. The overload protector is a device which monitors the current flowing through the circuit and trips when the current reaches a predetermined limit. The manual switch, on the other hand, is used to manually switch off the circuit when necessary.

When an overload or fault is detected, the circuit breaker trips and disconnects the circuit from the power source. The manual switch is used to reset the device and restore power to the circuit. The circuit breaker can also be manually opened to isolate the circuit and prevent any further damage to the system. The IEG62-35905-20-V is designed to be able to handle a high amount of fault current for a short period of time, making it suitable for industrial use.

The IEG62-35905-20-V circuit breaker is a reliable and easy to use device, making it ideal for applications in industrial and commercial settings. It can protect electrical systems from harm caused by overloading or short-circuiting, and is designed to be used in three-phase systems. The device is UL and CSA approved, making it suitable for high-voltage alternating current systems. It can handle high fault currents and is easy to install and reset.

The specific data is subject to PDF, and the above content is for reference