IEGH66-26397-15-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are essential components of complex electrical and electronic systems. An IEGH66-26397-15-V is an electric switch device used to protect electrical circuits and equipment from damage due to excessive current or electric overloads. This device will automatically detect and trip an over-current or overload, thus preventing damage to associated devices, such as wiring, motors, or other equipment.

The IEGH66-26397-15-V is a low-voltage, single-pole, panel-mounted, thermal-magnetic circuit breaker. It is designed for use in the primary power distribution system of buildings, factories, and other commercial and industrial establishments. It offers overload protection up to 15 amperes, as well as short-circuit protection. The IEGH66-26397-15-V is UL Listed and CE Certified and is designed to meet UL 1066 and UL 489B requirements.

The IEGH66-26397-15-V is an on-off switch used to connect and disconnect power to an electrical load. When activated, it will disconnect the power to the load. It is designed to open the circuit when an excessive current passes through it. The breaker will then remain open until the fault is cleared and manually reset by the user.

The working principle of the IEGH66-26397-15-V is based on two interlocking mechanisms: a thermal element, and a magnetic element. The thermal element is a bimetallic strip that heats up when a fault current passes through the circuit breaker. This causes the strip to bend, which releases a lever that opens the contacts, thus interrupting the flow of current and tripping the breaker. The magnetic element is a current-sensing coil that trips the breaker when an over-current is detected. The coil generates a magnetic field that operates with the lever to release it when certain current parameters have been exceeded.

The IEGH66-26397-15-V is suitable for a wide range of applications in commercial and industrial buildings, including switchboards, panel-boards, motor control centers, emergency lighting systems, and fire alarm systems. It is designed to provide reliable and secure protection against high overload currents and short circuits that may cause irreparable damage to expensive components and equipment. It is also suitable for high frequential application, and offers low contact surge currents that are safe in sensitive electronic or high-value components.

The IEGH66-26397-15-V is a robust, cost-effective solution for providing secure and reliable protection in a wide range of electrical and electronic applications. It is designed to provide secure and fastoverload protection, while still allowing the circuit to remain operational under normal operating conditions. It offers peace of mind to installers, as it is designed to give them confidence in the safety and performance of the installation.

The specific data is subject to PDF, and the above content is for reference