IEGHS111-29161-2-V

Series:	IEG
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	3
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

IEGHS111-29161-2-V is a miniature circuit breaker (MCB) manufactured by Eaton, one of the leading makers of electrical equipment and components used in industrial and commercial applications. MCBs are used to protect electric circuits from overloading and short-circuiting. This type of breaker is designed to protect circuits from 128A to 960A by providing a disconnection capability in the event of excessive current, and is suitable for a range of applications. This article will discuss the application field and working principle of IEGHS111-29161-2-V MCBs.

Applications of IEGHS111-29161-2-V MCBs

IEGHS111-29161-2-V MCBs are typically used to protect domestic, commercial, and industrial installations from overloading and short-circuiting. These breakers are capable of automatically disconnecting the circuit in the event of excessive current, preventing damage to the installation and potentially reducing the chance of electrical fires.The breakers are suitable for use in a range of environments, including enclosed and open operated gas groups, direct to gas groups, domestic, industrial, and commercial applications, and can also be used for motor control.The IEGHS111-29161-2-V MCBs are designed to be installed in circuits rated at 128A to 960A, making them suitable for a wide range of electrical load requirements. Furthermore, the breakers are IP40 rated, meaning that they are suitable for applications in areas with limited ingress protection.

Working Principle of IEGHS111-29161-2-V MCBs

An IEGHS111-29161-2-V MCB is a type of electrical switch made up of two pieces: a fixed contact and a moving contact. The fixed contact is connected to the power source, while the moving contact is connected to the load. When an excessive amount of current passes through the circuit, a thermal element built into the breaker causes the moving contact to open, which cuts off power to the load.The breakers are designed to trip at a specific current level, determined by the size and type of breaker. The breaker is equipped with an adjustable trip mechanism, allowing the user to adjust the level at which the breaker trips.

Conclusion

IEGHS111-29161-2-V MCBs are miniature circuit breakers manufactured by Eaton. These breakers are designed to protect electric circuits from overloading and short-circuiting, and are suitable for a range of applications, including enclosed and open operated gas groups, direct to gas groups, domestic, industrial, and commercial applications, and motor control. The breakers are designed to be installed in circuits rated at 128A to 960A, and are IP40 rated. The IEGHS111-29161-2-V MCBs work by using a fixed and moving contact, and an adjustable thermal element to cut off power to the load in the event of excessive current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description