IEGS1-1REC4-31314-5-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers offer protection to electrical applications against overload, short circuit, and insulation leakage. A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and then, by interrupting continuity, to immediately discontinue electrical flow.When a fault is detected, a circuit breaker trip unit will automatically and rapidly open the circuit. This means that all power to the circuit will be shut off, providing a safe environment for maintenance personnel and avoiding damage to equipment connected to the circuit.

IEGS1-1REC4-31314-5-V Application Field and Working Principle

The IEGS1-1REC4-31314-5-V circuit breaker is designed for indoor and outdoor applications, where high levels of overcurrent are present. It is designed for use in a variety of voltage conditions and is suitable for use in low and medium voltage circuits up to 250V or 440V.

The IEGS1-1REC4-31314-5-V circuit breaker is an insulated case circuit breaker with a two-pole break. It is rated for a continuous current of up to 75 A and is suitable for use within an installed current of up to 415A. This type of circuit breaker is provided with a manual operator, an electronic trip unit and an electronic overload protection system.

The manual operator is used to switch the breaker on and off, while the trip unit provides protection against overloads, short circuits and ground faults. The overload protection system uses sensors to monitor the current in the circuit and will open the circuit if the current exceeds the trip point. This system also switches off the circuiting breaker after a time delay for protection against overloads with abnormally high current ratings.

The IEGS1-1REC4-31314-5-V circuit breaker also has a voltage sensing mechanism which compares the voltage of the circuit with an adjustable voltage reference. If an overvoltage is detected, the breaker will trip and disconnect the circuit from the power source.

The IEGS1-1REC4-31314-5-V circuit breaker is typically used in a variety of applications such as main power distribution services, branch circuits, motor control centers and in the monitoring of machinery and equipment. It is especially suitable for applications requiring high levels of overcurrent protection.

The specific data is subject to PDF, and the above content is for reference