IEGZX11-1-62F-10.0-A-42-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The IEGZX11-1-62F-10.0-A-42-V circuit breaker is a type of device which is designed to quickly disconnect electricity when an overload or short circuit is detected. The breaker is designed to trip when the current it carries exceeds its rated value and to break the connection between the source and load. In this article, we will discuss the application field and working principle of this type of breaker.

Application Field

The IEGZX11-1-62F-10.0-A-42-V circuit breaker is typically used in residential and commercial applications. The breaker is commonly found in circuits handling currents up to 10 Amps. In commercial applications, the breaker is typically used to protect equipment from damage due to overloads.

The IEGZX11-1-62F-10.0-A-42-V circuit breaker is also designed for use in industrial applications. The breaker can be used to protect high voltage circuits in industrial settings where the current can range from 20 Amps up to several hundred Amps. The breaker is designed to quickly trip and isolate the source of a fault before it can cause further damage.

Working Principle

The IEGZX11-1-62F-10.0-A-42-V circuit breaker works by using an embedded bimetallic strip in its design. The strip is heated as the current running through it increases. As the current continues to rise, the strip bends further until it eventually reach a point where it snaps and breaks the connection. This sudden rupture of the connection triggers the circuit breaker to open, disconnecting the current and stopping any further damage being done.

The IEGZX11-1-62F-10.0-A-42-V circuit breaker is designed so that it can quickly reset once the current drops back below the rated value. The breaker can be manually reset by pushing a reset button or turning a switch, which will restore the connection and start the current flowing again.

Conclusion

The IEGZX11-1-62F-10.0-A-42-V circuit breaker is designed for both residential and commercial use. The breaker works by quickly disconnecting electricity when an overload or short circuit is detected. The breaker is designed to trip as soon as it detects that the current is exceeding its rated value. It can then be manually reset to restore power and start the current flowing again. This makes the breaker an incredibly useful tool for protection circuits from overloads and short circuits.

The specific data is subject to PDF, and the above content is for reference