IELHK111-1-62F-70.0-ABK-01-V

Introduction to Circuit Breakers

A circuit breaker is an electrical device designed to protect an electrical circuit from damage caused by excessive current, also known as over current. Circuit breakers are typically mounted in the electrical panel of a home, business, or other building and can be used to protect circuits, power distribution systems, and other critical equipment. Circuit breakers come in a variety of different types, each designed to provide a specific protection function.

IELHK111-1-62F-70.0-ABK-01-V Application Field and Working Principle

The IELHK111-1-62F-70.0-ABK-01-V is an automated circuit breaker that is designed to protect against faults and other dangerous conditions on an electrical network. The breaker provides short-circuit protection and can rapidly detect and respond to overloads and other potentially hazardous conditions. The device has a wide operating range and can be used for either single-phase or three-phase protection for up to 65A.

The IELHK111-1-62F-70.0-ABK-01-V breaker operates through the use of a coil-type mechanical trip assembly. When current flowing through the circuit breaker exceeds the maximum current allowed, the trip assembly is activated. This trip assembly connects two breakers, one on the top and one at the bottom. When the current reaches its maximum value, the trip mechanism springs into action, interrupting the circuit and preventing further damage.

When the breaker detects an overload condition, it will open and remain open until the current is reduced to a safe level for the circuit. Additionally, the breaker can be manually reset if needed. The IELHK111-1-62F-70.0-ABK-01-V is a reliable and safely designed circuit breaker that is easy to install and reliable in operation.

Conclusion

The IELHK111-1-62F-70.0-ABK-01-V is a reliable and sophisticated automated circuit breaker that is designed to protect against overload, short circuit, and other potentially hazardous conditions. It operates through a coil-type mechanical trip assembly that rapidly interrupts the circuit when current reaches its maximum value. The breaker is suitable for single-phase and three-phase protection up to 65A and is easy to install and reliable in operation.