IM04EB470J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components designed to store energy in the form of electrical current in magnetic fields. They are usually composed of a coil of wire and a core of ferromagnetic material, such as iron or steel. An inductor is often referred to as a "reactive" component, as when a current flows through its windings, a magnetic flux in the core is created that either opposes or helps the flow of current, depending on whether the inductor is "boosting" or "short circuiting" the current. Inductors are widely used as filters, chokes, and in high-frequency and audio circuits, as well as power supplies, and can be found in anything from radio receivers to computer motherboards.

The IM04EB470J is a fixed inductor designed for a variety of applications, including filters, chokes, RF circuits, and audio circuits. The IM04EB470J is a four-terminal device, with two input terminals and two output terminals. Its design enables it to act as a low-pass filter, blocking out unwanted high frequency signals and allowing only those signals that have the desired frequency range to pass through. It also has good frequency stability and very low impedance in high frequency circuit applications, thereby minimizing signal crossover interference.

The IM04EB470J incorporates two winding layers of enamelled copper wire. The core of the inductor is made from ferrite materials and is designed to ensure very low losses at frequencies between 50 kHz and 1 MHz. The insulation of the copper wire is also designed to ensure a long working life in spite of mechanical shock and vibrations. These features make the IM04EB470J an ideal choice for use in audio and high frequency electronic applications.

The working principle of the IM04EB470J is based on the fact that when current passes through its windings, an electromagnetic field is produced around the core of the inductor. This field lines up with the applied electrical current and tends to oppose any change in the flow of the current. In other words, it "resists" sudden change in the current flow, and this resistance is known as inductance. The strength of the inductance is determined by the size and number of turns in the windings, as well as the core material used in the construction of the inductor.

The IM04EB470J fixed inductor is a high performance device, designed for a wide range of applications. It is ideal for use in audio and high frequency circuits, as it is able to provide very low impedance in such applications, thereby minimizing signal cross-over interference and providing excellent frequency stability. Additionally, its feature of inhibiting high frequency signals make it the perfect choice for use as a filter in many electronic devices.

The specific data is subject to PDF, and the above content is for reference