IM06SHR82K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, also known as inductors, are components in a circuit that store inductance, which is related to magnetic energy. When an alternating current passes through the inductor, the magnetic energy stored by the inductor is converted into electrical energy. The IM06SHR82K is an example of this type of component. It is a steel core circuit component that is primarily used in single-phase AC circuits.

The IM06SHR82K is a 6-pole radial inductor with an inductance of 82mH and a resistance range of 0.32-1.8Ohm. It has a direct current capacity up to 1.5amps and an alternating current capacity of 2.4amps. The operating temperature of the device is between -40°C and 85°C. Its total internal magnetic loss (IML) is 436mW. The device is rated for a minimum of 1000 hours at rated temperature and operates with a voltage rating of 400 VAC.

The working principle of the IM06SHR82K is based on the concept of inductance. This is the ability of a circuit or component to store energy in the form of a magnetic field when an electrical current passes through it. When an electrical current passes through the IM06SHR82K, a magnetic flux is generated, inducing a voltage in the winding of the inductor. This voltage is proportional to the rate of change of the current and is inversely proportional to the inductance of the component.

The IM06SHR82K is mainly used in single-phase power applications such as power supplies, motor controllers, and other circuits where AC power needs to be converted to DC power. In addition, it is used in circuits where pulse shaping, voltage spike suppression, and frequency control are required. It is also commonly used in radio frequency circuits, television tuners, and high-frequency switching power supplies.

In summary, the IM06SHR82K is a steel core circuit component used for storing inductance and providing electrical energy conversion in single-phase AC circuits. The inductor has a direct current capacity of 1.5amps and an alternating current capacity of 2.4amps. It is primarily used in applications where AC power needs to be converted to DC power, as well as circuits where pulse shaping, voltage spike suppression, and frequency control are required.

The specific data is subject to PDF, and the above content is for reference