IMC1210AN3R3K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are electronic components found in many electronic circuits. They create inductance, which is a current-dependent property. Inductance results in an opposing voltage as current increases. The voltage reacts against the forward current. This reactance acts as a filter, blocking or limiting the higher frequencies in a circuit, while allowing the desired lower frequency signal through. That’s why inductors are often used in radio receivers to block any unwanted signals.

The IMC1210AN3R3K is a fixed inductor made by Infineon Technologies. It has a rated inductance of 3.3uH with a DC resistance of 0.17ohms. The maximum DC current rating is 2.5A and the maximum AC current is 5.0A. The inductor has a comparatively low profile, small size, low DC resistance, and large current capacity. This makes it suitable for various applications.

The most common application of the IMC1210AN3R3K is for filtering and decoupling high frequency signals. The inductor blocks unwanted harmonics, protects downstream circuits, and reduces radiated interference. It is commonly used in loudspeaker systems, DC/DC converters, HVAC systems, plug-in hybrids and in many other power-saving, high-reliability, and low power consumption systems.

In addition to its filtering abilities, the IMC1210AN3R3K is also used in resonators, parallel resonant circuit applications, and as choke coils. It is suitable for use in both smps and low profile pi-filters. The inductor is also suitable for frequency-control circuits and switching circuit applications. It is often used in circuits requiring precision input voltages, such as low voltage LED lighting.

The working principle of the IMC1210AN3R3K is based on the induction of a voltage across an inductor when a current flows through it. When a current is applied to an inductor, a voltage is induced across its terminals. The voltage is an opposing force to any change in current, so it increases as the current increases. The resulting voltage blocks the higher frequencies in a circuit, while allowing the lower frequency signal through.

The Inductor also has other qualities that make it suitable for certain applications. One such quality is its self-resonance frequency. This refers to the frequency at which an inductor can produce a voltage of its own. The self-resonance frequency is usually higher than the operating frequency of the circuit, so it can be used for filtering out high-frequency signals, or for reducing noise in RF circuits.

The IMC1210AN3R3K inductor combines all the qualities of a fixed inductor to provide great performance in a range of applications. Its low profile, small size, low DC resistance, and large current capacity make it suitable for use in various applications. Its self-resonant frequency and voltage blocking characteristics make it ideal for use as a filter in radio receivers and noise-reduction circuits, as well as for power-saving, high-reliability, and low power consumption systems.

The specific data is subject to PDF, and the above content is for reference