IMC1210EB150K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components typically used in electrical and electronic circuits to induce electromagnetic fields and to act as a local energy storage device. A particular type of fixed inductor is the IMC1210EB150K, a high voltage surface-mount coil designed for use in consumer electronics. The purpose of this article is to provide an overview of the IMC1210EB150K component, including its application field and working principle.

The IMC1210EB150K is a high-voltage surface-mount coil designed to be used in consumer electronics. It is in the shape of a rectangle that is 10mm wide, 12.5mm long, and has a thickness of 1.5mm. The rated inductance of the IMC1210EB150K is 1.5 uH, and the DC resistance is 0.18 Ohm. The maximum rated voltage is 2.5V, and the current handling capacity is 70mA.

Applications for this component are primarily focused around controlling the output current of DC/DC converters, controlling the electromagnetic fields generated by solenoids, stepper motors, and other types of mechanical motors, and voltage boosting applications. The high voltage rating and low resistance of the IMC1210EB150K make it suitable for these types of use. It is also possible to use the IMC1210EB150K to construct an LC circuit, commonly used in applications such as frequency measuring and tuning.

The working principle of the IMC1210EB150K is based on the laws of electromagnetism. When current passes through the coil, a magnetic field is generated due to magnetic flux. This magnetic field induces a voltage in a parallel circuit, which can then be used to control the current in the circuit.

The IMC1210EB150K can also be used in harmonic-rejection filter circuits, which are used to reduce the undesired harmonics in power supplies and voltage converters. These filters are necessary to ensure that the desired signal is not distorted by the harmonic distortion caused by the power supply.

In conclusion, the IMC1210EB150K is a high-voltage surface-mount coil designed for use in consumer electronics. It is primarily used to control the output current of DC/DC converters and to control the electromagnetic fields generated by solenoids, stepper motors, and other types of mechanical motors. The working principle of the IMC1210EB150K is based on the laws of electromagnetism, and the component can be used in harmonic-rejection filter circuits to reduce the undesired harmonics in power supplies and voltage converters.

The specific data is subject to PDF, and the above content is for reference