IMC1210ERR33K Inductors, Coils, Chokes

DC Resistance (DCR):	400 mOhm Max
Height - Seated (Max):	0.095" (2.41mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.49mm)
Supplier Device Package:	1210
Package / Case:	1210 (3225 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	25.2MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	300MHz
Q @ Freq:	30 @ 25.2MHz
Series:	IMC-1210
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	453mA
Tolerance:	±10%
Inductance:	330nH
Material - Core:	Iron Powder
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed Inductors are an important electronic component used to store energy in the form of a magnetic field. They are used in wide range of applications, from simple hobbyist projects to complex and critical medical and defense equipment. The IMC1210ERR33K is an example of a fixed inductor, and is widely used in a variety of electrical and electronic circuits. This inductor is a small toroidal device, with a 1210 inch form factor and a maximum height of 0.73 inches. It is composed of a silver-plated ferrite core and a 3.3μH inductance rating. It features a high saturation current of up to 40A. The IMC1210ERR33K is available in a variety of package types, including through-hole and surface mount. The IMC1210ERR33K is mostly used in power supply circuits, to create and store energy from alternating current (AC). It is used in both switch mode and linear mode power supplies. In switch mode power supplies, it is used to induce ripple current on the output side, which helps reduce the losses due to ripple current and makes the circuit more efficient. In linear power supplies, the inductor is used to filter the alternating current, allowing only the required frequencies into the output stage. This further improves the efficiency and reliability of the circuit.The IMC1210ERR33K can also be used in frequency filter circuits. It can be used as a low-pass filter, which can block frequencies higher than the guaranteed rated 3.3μH inductance. It can also be used as a high-pass filter, which will allow only frequencies higher than its inductance rating into the circuit. The inductor can also be used in voltage regulator circuits, where it is used to filter the input voltage and reduce noise and ripple.Aside from power supply and frequency filter applications, the IMC1210ERR33K can also be used in resonant circuits, where the inductor helps create a resonance effect which can be used to detect changes in signal amplitude or frequency. It can also be used in impedance matching circuits, in which it helps reduce the overall power consumption by matching the impedance of the component connected to it. The IMC1210ERR33K offers excellent power performance, reliability, and noise protection, and is widely used in power supply, filter, and resonant circuits. It is relatively easy to install and use, and provides a cost-effective and reliable solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description