IMC2220ER1R2K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components that store energy in the form of a magnetic field. They are commonly found in electronic circuits where they are used to create inductive reactance for AC signals and to filter out high-frequency AC noise. The IMC2220ER1R2K is a type of fixed inductor designed specifically for high-current, high-frequency applications.

The IMC2220ER1R2K is constructed with a small ferrite core encased in a molded plastic housing. The core is made of a high-frequency permalloy that provides an excellent impedance match. A pair of windings is wound around the core and when energized, a weak magnetic field is created. The stored energy is proportional to the current flowing through the windings and increases as the frequency rises. This makes the IMC2220ER1R2K well suited for applications where high-frequency, high-current signals are present.

The IMC2220ER1R2K can be used in a variety of high-frequency applications to filter out noise, limit current, stabilize voltages, and more. In power supplies, it can be used to limit the output current, filter out high-frequency noise, and reduce ripple. It can also be used in combination with other passive components to create a tuned circuit for frequency selection or in oscillator circuits to create an autonomous signal.

Another major application for the IMC2220ER1R2K is in AC-DC converters. Here, it is used as a series connected inductor to limit the current flow through the circuit. This is achieved by creating a positive voltage when an AC signal is detected, which increases the output voltage of the converter. By adjusting the inductance of the inductor, the current can be accurately limited to ensure that the circuit does not overload.

The IMC2220ER1R2K is also used to filter out high-frequency noise. This type of noise occurs in radio communications, audio systems, and other circuits that use RF signals. An inductor connected in parallel with the circuit will attenuate the high-frequency signals while still allowing the low-frequency signals to pass. The inductance of the inductor can be adjusted to remove any unwanted frequencies.

Finally, the IMC2220ER1R2K can be used to stabilize voltages in electronic circuits. By connecting it in series with the supply voltage, it can act as an energy reservoir to smooth out fluctuations. This makes the circuit more resistant to noise and allows a constant output voltage to be maintained regardless of variations in the input voltage.

The IMC2220ER1R2K is an excellent choice for high-current, high-frequency applications. It can be used to limit current, filter out noise, and stabilize voltages. It is constructed with high-frequency permalloy and precision windings and is very reliable and cost effective.

The specific data is subject to PDF, and the above content is for reference