IMS05BHR39K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a type of electrical component that features two terminals, called positive and negative, where current enters one terminal and leaves the other. In the case of the IMS05BHR39K inductor, it is made of a molded ferrite metal core with a winding of copper wire. The ferrite core helps to store energy while the windings provide a low-resistance path for the current, acting as an electrical conductor.

Primarily, the IMS05BHR39K is used as an inductor in power supply circuits, such as for AC/DC adapters, switching regulators, DC/DC converters, Class-D amplifiers, and many other applications. Additionally, it is also widely used in any project that requires noise filtering and/or low frequency operation due to its low inductance coefficient.

In terms of its structure, the IMS05BHR39K is an open-frame type of inductor with a ferrite core. The winding of the inductor is made with a copper wire, while the rest of the core is made of a rubber-like material that provides additional insulation. This type of device is known for its good mechanical properties, allowing for higher temperature operation and increased reliability.

The IMS05BHR39K can operate at temperatures ranging from -25C up to +125C, and has an impedance range of 100mOhm to 5.8Ohm with an inductance range of 2.1-10uH. It also features a saturation current of 30A with an isolation voltage of 500V, making it suitable for use in high voltage circuits.

The working principle of the IMS05BHR39K is based on Faraday’s law of electromagnetic induction. When current passes through the windings of the ferrite core, it creates an electromagnetic field that induces an opposing current in the wire. This opposing current is then used to provide a low-resistance path for current flow, thus acting as an electrical conductor.

When an AC signal is applied to the IMS05BHR39K, it produces a higher AC impedance compared to that of a resistor. This means that it helps to reduce the intensity of any alternating current, allowing the current to be better managed in the circuit. Additionally, due to its ferrite core, it also acts as an effective filter for any unwanted high-frequency noise.

In summary, the IMS05BHR39K inductor is a type of electrical component that is primarily used as an inductor in power supply circuits. It features a ferrite core and a winding of copper wire, and has an impedance range of 100mOhm to 5.8Ohm. Moreover, due to its Faraday’s law of electromagnetic induction, it is able to provide a low-resistance path for current flow while also functioning as a noise filter.

The specific data is subject to PDF, and the above content is for reference