IMS05WDEB102J40

Q @ Freq:	62 @ 250kHz
Height - Seated (Max):	--
Size / Dimension:	0.164" Dia x 0.450" L (4.17mm x 11.43mm)
Supplier Device Package:	Axial
Package / Case:	Axial
Mounting Type:	Through Hole
Features:	--
Inductance Frequency - Test:	25kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	4.5MHz
Series:	IMS-5WD-40
DC Resistance (DCR):	16 Ohm Max
Shielding:	Shielded
Current - Saturation:	52mA
Current Rating:	140mA
Tolerance:	±10%
Inductance:	1mH
Material - Core:	Ferrite
Type:	--
Part Status:	Obsolete
Packaging:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Inductors are electronic devices used in electricity circuits to store energy in the form of a magnetic field. Fixed Inductors, also known as Fixed-Coil Inductors, are passive two-terminal electrical components usually made from coils of wire. Fixed Inductors are used to block or pass currents and also to store energy in a magnetic field. IMS05WDEB102J40 is an example of a Fixed Inductor known for its stable performance and low DCR values. It is especially suitable for high frequency energy containment applications such as in filter circuits and switching power supply circuits. This Fixed Inductor has low residual inductance and a high power dissipation factor - both of which help in reducing distortion in high-amplification end-stage amplifier circuits. The IMS05WDEB102J40 has a 20A rated current, a 10.2uH inductance, and a DCR of 0.19 ohms. Its robust construction and 3-pitch mounting make it suitable for harsh environmental conditions. Moreover, its low power loss also helps to reduce energy wastage in electric circuits. The working principle of the IMS05WDEB102J40 is total reactive power containment, which is based on the Faraday\'s law of induction. This law states that a voltage is induced in a coil when the current through it changes.Thus, when a steady current is applied to the coil, the magnetic field generated induces a voltage in the same coil (the coil is a short circuit, so the current remains constant). This voltage is proportional to the rate of change of current (or the inductance of the coil). As a result, the IMS05WDEB102J40 helps to contain a large amount of current in a circuit and prevent it from spilling out by converting it into a magnetic field.The IMS05WDEB102J40 Fixed Inductor is primarily used in applications such as air-core and soft-magnetic inductors, voltage doubling capacitor scavenging circuits, and shielded loop inductors. It is also a popular choice for voltage-mode amplifiers, active filters, and many other switching power supply circuits. In summary, the IMS05WDEB102J40 Fixed Inductor is a small yet powerful device that can store a large amount of energy in a circuit. Its low power losses and 3-pitch mounting feature make it ideal for harsh environmental conditions, while its low DCR values provide added stability to the circuit. Therefore, this fixed inductor is an essential component for a variety of high-power energy containment applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description