IPC-DT-5230E Allicdata Electronics
Allicdata Part #:

IPC-DT-5230E-ND

Manufacturer Part#:

IPC-DT-5230E

Price: $ 99.54
Product Category:

Embedded Computers

Manufacturer: Advantech Corp
Short Description: RACK 2 X 5.25" TO 3 X 3.5" HDD
More Detail: N/A
DataSheet: IPC-DT-5230E datasheetIPC-DT-5230E Datasheet/PDF
Quantity: 1000
1 +: $ 90.49320
Stock 1000Can Ship Immediately
$ 99.54
Specifications
Series: --
Part Status: Active
Accessory Type: Hardware
Specifications: Mobile Rack
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IPC-DT-5230E Application Field and Working Principle

The IPC-DT-5230E is a kind of accessories used in many different application fields. It is a high-performance, digital signal processing (DSP)-based, dual-channel differential pressure transmitter with peak electrical isolation. It can be used to measure both positive and negative pressure values. The transmitter has two separate pressure ports that are pre-calibrated before being sealed off. It will then output a proportional digital signal that can be read by the host system.

Technological Principle of IPC-DT-5230E

The IPC-DT-5230E has an embedded DSP chip for advanced signal processing, vibration measurement, and the required baseline calibration of the installed pressure transducer. It can be deployed to measure and monitor any type of pressure gradient from both positive and negative pressures in a variety of applications. The device utilizes the piezoresistive pressure sensing technology which is based on the phenomenon of semiconductor material deformations due to a mechanical stress like from a fluid pressure difference. By exploiting the piezoresistive effect, the IPC-DT-5230E can measure the pressure within a range of -100kPa to +100kPa with accuracy up to 0.25%FS.

Application Field of IPC-DT-5230E

The IPC-DT-5230E has a wide variety of applications. These applications include but are not limited to: fluid pressure monitoring, such as water, air, gas, and oil; HVAC systems for airflow monitoring and pressure balancing; process instrumentation to monitor and control process variables; and automotive applications for measuring brake pressure and intake manifold pressure.

The IPC-DT-5230E is also designed for applications where performance is critical, such as in the medical industry. Its ability to used in medical instruments allows for more precise measurements, such as blood pressure, and the monitoring of other pressure measurements during medical procedures. The transmitter also offers excellent reliability and durability in these application fields, being able to withstand extreme temperatures, high pressures, and vibrations.

Conclusion

To sum up, the IPC-DT-5230E is a high-performance, digital signal processing (DSP)-based, differential pressure transmitter used for a variety of applications. It utilizes piezoresistive technology and can measure pressure up to -100kPa to +100kPa with accuracy up to 0.25%FS. It has many applications, including fluid pressure monitoring, HVAC systems, process instrumentation, automotive applications, and medical instruments. The IPC-DT-5230E is also designed for applications where performance is critical, providing excellent reliability and durability.

The specific data is subject to PDF, and the above content is for reference

Latest Products
MM8-CSBN

IC DRAM DDR MEMORY

MM8-CSBN Allicdata Electronics
MM8-CEBN

IC DRAM DDR MEMORY

MM8-CEBN Allicdata Electronics
MM8-1EBR

IC DRAM DDR 1GB

MM8-1EBR Allicdata Electronics
MM5D-512R

IC DRAM DDR 512MB SODIMM

MM5D-512R Allicdata Electronics
MM5D-1GBETR

IC DRAM DDR 1GB 200PIN PC2700

MM5D-1GBETR Allicdata Electronics
96ND900G-SS-SG10E1

SG ENTERPRISE 900GB 10KRPM SAS 1

96ND900G-SS-SG10E1 Allicdata Electronics