IPL1-117-01-L-D-P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors – Headers, Male Pins are the most common type of accessory that can be used to connect one electronic device to another, and the International Component Number (IPL1-117-01-L-D-P) is a popular choice for many types of electronics. This type of connector is designed with two lines of pins, one line aimed towards the center of the connector and the other line aimed towards the outside edges. It also has a center pin surrounded by four additional pins and a gap between the two lines, all of which are connected together with a single metal contact.

The IPL1-117-01-L-D-P is designed with a side open end, making it suitable for applications where cable strain relief is desired. The pins in the connector are typically arranged in a line pattern, with the center pin surrounded by four pins on either side in equal arrangements. This makes the connection path easy to see and reduces the chances of cross-terminating the wires or the pins on the cable.

The IPL1-117-01-L-D-P is primarily used in peripherals, car audio systems, and other electronics that require the connection of cables and wires. To create a reliable connection in these applications, the conductors and wires must be securely connected together. To ensure the connection is secure, all of the pins and wires should be properly placed into the connectors. It is important to note that the pins of the connector should never be tilted or lifted, as this can cause cross-termination of the wires.

The working principle of the IPL1-117-01-L-D-P is simple. When a cable is inserted into the connector, the metal contacts of the connector make contact with the conductors of the cable. In this way, an electrical circuit is created. The pins in the connector serve as a bridge between the conductors and the circuit. As current flows across the pins, the circuit is completed and the electrical signal is sent through the cable.

To create a reliable connection, the metal contacts must be securely connected to the conductors. This is done by using a soldering iron to heat the contacts and join them with the conductors of the cable. The temperatures required to ensure a secure connection range from 450°F to 600°F. Once the soldering is complete, the connection should be tested to verify that current can flow freely.

The IPL1-117-01-L-D-P is a reliable and durable connector that is designed to provide a secure connection between two devices. Its design allows for a reliable connection between the conductors and the circuit, and its simple working principle makes it suitable for use in many different types of electronics.

The specific data is subject to PDF, and the above content is for reference