ISD0103D05 Power Supplies - Board Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are a type of voltage regulator used for controlling the voltage in electronic circuits that require a higher level of performance than can be provided by linear voltage regulators. A DC DC converter is a device that converts a fixed DC input voltage into a regulated DC output voltage. The DC DC converter is often used in applications where the output voltage is different from that of the source. The ISD0103D05 is one such model of DC DC converter. It is designed to provide a regulated output voltage with low ripple and significantly reduced standby power.

The ISD0103D05 is a synchronous step-down DC DC converter with internal MOSFETs. It features input voltage range of 4.5V to 20V, output voltage range of 0.6V to 15V, and a switching frequency of 500kHz. It offers high efficiency up to 95% with very low noise. With built-in thermal shutdown circuitry, the ISD0103D05 protects itself and its components from over temperature.

The ISD0103D05 can be used in a wide range of applications. It is well suited for powering microcontrollers, DSPs, FPGAs, digital isolators, analog ICs, LEDs and other sensitive electronics. It can also be used for powering point-of-load applications and embedded systems.

The working principle of the ISD0103D05 is relatively simple. The device takes advantage of a PWM signal generated by a controller. This signal is used to control the MOSFETs in order to regulate the output voltage. The signal is also used to control the inductor current, which is used to store the energy during the switching time. The inductor current also produces a back-EMF voltage which is used to limit the inductor current. The voltage across the output capacitor is compared to a reference voltage to regulate the output voltage. The ISD0103D05 provides current limited or soft start mode operation.

The ISD0103D05 also features integrated Dynamic Voltage Positioning (DVP) which enables system designers to maintain very tight regulation of the output voltage in varying conditions. This feature improves system reliability and enables the designer to reduce system cost by using fewer external components. The ISD0103D05 also provides an enable/disable pin which can be used to switch the device on and off without cycling the power.

The ISD0103D05 is a synchronous step-down DC DC converter that is highly efficient and offers very low ripple. With integrated thermal protection and Dynamic Voltage Positioning, the ISD0103D05 is an excellent choice for powering microcontrollers, DSPs, and other sensitive electronics. It is also well suited for point-of-load and embedded systems. The working principle of the ISD0103D05 is based on a PWM signal which is used to control the MOSFETs to regulate the output voltage.

The specific data is subject to PDF, and the above content is for reference