ISL29035EVAL1Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ISL29035EVAL1Z is a high performance evaluation board featuring a Digital Ambient Light Sensor with Interrupt Output from Renesas Electronics. This evaluation board was designed primarily with motion and lighting applications in mind, and has a range of features specific to those applications including an adjustable interrupt, an enabled supply/shutdown, a programmable full-scale range, and an automatic gain control for improved signal to noise.

The board itself is a small form factor board designed to be connected directly to an 8-pin board to board connector. This allows it to be conveniently embedded into an application’s hardware design without any external wiring or harnesses. The board also features an I2C Communications Interface allowing it to communicate with a host microcontroller or system controller.

The ISL29035EVAL1Z board utilizes a Renesas 3-channel ambient light sensor with a built-in 16-bit ADC and a range of gain settings to regulate the light levels. The light level is measured using three photodiodes, which are then converted into a 16-bit digital value. This is then transmitted to the host controller via an I2C interface for further analysis and manipulation.

The board also features a programmable interrupt that can be configured to trigger when a certain light level is exceeded or dropped below. This interrupt can be used to initiate actions within the application such as turning off a device or changing its settings. Additionally, a switch on the board can be used to enable/disable the supply and/or shutdown the board.

The ISL29035EVAL1Z board takes advantage of its integrated light sensor and I2C interface to measure changes in the ambient light levels and report them to the host controller. This data can then be used to design applications that require precise or rapid responses to changing light levels. It can also be used for motion sensing applications such as occupancy sensing or daylight harvesting, where the ambient light levels can be monitored and used to control a device’s operation.

The ISL29035EVAL1Z is a great choice for applications requiring precise and accurate measurements of light levels. With its adjustable interrupt, adjustable gain, and automatic gain control, it is a versatile board that can be used in a variety of applications. Additionally, its small form factor allows it to be integrated into an application’s hardware design without an external harness, making it an ideal solution for those applications.

The specific data is subject to PDF, and the above content is for reference