ISL6263DEVAL1Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ISL6263DEVAL1Z is an evaluation board from Intersil Corporation, designed for use with their inductorless direct-to-battery synchronous DC/DC converter, the ISL6225/ISL6223. This evaluation board is designed to assess the performance of the ISL6225/ISL6223 devices in the field of DC/DC and AC/DC (off-line) switched mode power supplies (SMPS), and has been designed to facilitate evaluation of their characteristics and behavior under realistic conditions.

The ISL6263DEVAL1Z evaluation board has been designed to demonstrate the exceptional performance and reliability of the ISL6225 and ISL6223 devices in applications ranging from relatively low power, low voltage, down to 0.6V, to high power, high voltage, as much as 12V. The ISL6263DEVAL1Z board features an input voltage range of 4.5-16V, with an adjustable output voltage from 0.6 - 12V. The output current is limited to 1A. The board comes pre-configured for a 0.6 - 6V output range, but can be reconfigured for higher output voltages. An external resistor must be connected to the EN pin to select the desired output voltage, and the board utilizes a fixed frequency of 500kHz.

The ISL6263DEVAL1Z board is supplied with an operating system running on a PC or laptop, which enables the user to evaluate the device behavior under varying conditions. The evaluation board utilizes a graphical user interface in order to allow the user to configure the board accordingly in order to assess the performance of the ISL6225 and ISL6223 in the field of DC/DC and AC/DC (off-line) SMPS.

The ISL6263DEVAL1Z board features On-Time thermal protection, cycle-by-cycle current limit, frequency foldback for cooling management and overvoltage protection. The board also supports programmable features such as frequency, peak current limit, power good delay, power enable sequence, and soft start. The user is able to adjust each of these functions according to their application requirements using the GUI.

In addition to the features and functions presented by the ISL6263DEVAL1Z evaluation board, the user is able to fully evaluate the device performance by testing its output voltage, current, temperature, power and safety features. The board also allows for the measurement of minimum and maximum values, frequency and ripple, as well as the evaluation of the duty cycle and efficiency. The board also provides the user with the ability to simulate a load in order to accurately determine the device performance under realistic conditions.

The ISL6263DEVAL1Z evaluation board allows for a comprehensive performance evaluation of the ISL6225 and ISL6223 devices in the field of DC/DC and AC/DC (off-line) SMPS. The board is a powerful development and evaluation tool which will help engineers to evaluate and take full advantage of the features and functions of these devices.

The specific data is subject to PDF, and the above content is for reference