IULNK111-33241-30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are an essential system of electrical protection to guarantee the safety of an electrical system in the event of a surge, overvoltage, or short circuit. The IULNK111-33241-30 is a type of circuit breaker designed to automatically disconnect the power from circuits in the event that an electrical surge is detected. It is most commonly used in industrial applications and is popular for its high level of protection and performance.

The IULNK111-33241-30 circuit breaker is composed of two primary components: a starter motor and a relay switch. The starter motor is responsible for initiating the electrical current and actuating the relay switch. The relay switch is the component that actually monitors the current through the circuit breaker and will activate or deactivate it based on the electrical current detected. If the current detected is above the recommended safety level, the relay switch will automatically disconnect the power from the circuit’s power source.

The IULNK111-33241-30 circuit breaker works by using an electromechanical mechanism to detect the presence of an electrical surge. When there is a surge, the starter motor is actuated, which causes the relay switch to open and interrupt the power supply to the circuit. This prevents any further damage that could be caused by the electrical surge. To reset the circuit breaker after an electrical surge, the starter motor must be manually reset.

The IULNK111-33241-30 circuit breaker is designed to provide protection from electrical surges, overvoltages, and short circuits. It is capable of handling up to 30 amperes of current and is recommended for industrial applications, such as control panels, service entrance lines, and ventilation systems. The circuit breaker can be installed as part of a single-phase or three-phase system and has an interrupt rating of up to 10,000 amperes.

The key benefit of the IULNK111-33241-30 circuit breaker is its ability to detect and interrupt a current as soon as an electrical surge or overvoltage is detected. This prevents any further damage to the electrical system, ensuring a safe and reliable environment. The circuit breaker is also designed to be easy to install and maintain, with no complex wiring or complicated setup required.

The IULNK111-33241-30 circuit breaker is an essential system for protecting valuable electrical equipment from surges, increasing the safety and reliability of industrial applications. The circuit breaker is able to detect any overvoltage or short circuit within a few milliseconds, ensuring that no damage is done to the electrical system.

The specific data is subject to PDF, and the above content is for reference