Allicdata Part #: | J45S20K-ND |
Manufacturer Part#: |
J45S 20K |
Price: | $ 51.36 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Nidec Copal Electronics |
Short Description: | POTENTIOMETERS |
More Detail: | 20k Ohm 1 Gang Linear Servo Mount Potentiometer No... |
DataSheet: | J45S 20K Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
20 +: | $ 46.68870 |
40 +: | $ 39.31680 |
60 +: | $ 36.85960 |
100 +: | $ 35.63090 |
Temperature Coefficient: | ±50ppm/°C |
Mounting Type: | Servo Mount |
Bushing Thread: | -- |
Actuator Diameter: | 0.236" (6.00mm) |
Actuator Length: | 0.787" (20.00mm) |
Actuator Type: | Round |
Termination Style: | Solder Turret |
Resistive Material: | Wirewound |
Adjustment Type: | User Defined |
Rotation: | Continuous |
Number of Turns: | 1 |
Series: | J |
Power (Watts): | 1.3W |
Built in Switch: | None |
Number of Gangs: | 1 |
Tolerance: | ±5% |
Resistance (Ohms): | 20k |
Moisture Sensitivity Level (MSL): | -- |
Taper: | Linear |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The J45S 20K rotary potentiometer, rheostat, is used in a wide range of electrical and electronic products, from consumer electronics to industrial equipment and control systems. It is a versatile device commonly used to adjust circuits, resistances, and pressures, and to provide feedback signals for user commands. The J45S 20K consists of a short section of a conductive strip, or track, with a wiper that runs across it. The wiper is attached to a shaft, enabling the user to adjust it. A common application for a rotary potentiometer, rheostat, is as a volume control in audio equipment, allowing the user to adjust the volume of audio playback from a minimum to a maximum level.
The working principle of a rotary potentiometer, rheostat is relatively simple. As the user adjusts the wiper, more or less of the conductive track is covered, thereby increasing or decreasing the resistance. This change in resistance is used to control the flow of current in the circuit, allowing the user to adjust the volume or pressure of the circuit. The resistance can also be used to create a voltage drop, which can be used to create a signal in the circuit.
Aside from audio applications, rotary potentiometers, rheostats, can also be used to measure mechanical pressures and speeds. This is done by measuring the displacement of the wiper as the pressure or speed increases. This displacement is then used to calculate the mechanical force or speed. The device can also be used to measure the position of a piece of equipment in an automated system.
Rotary potentiometers, rheostats, are also useful in many industrial applications such as HVAC systems, motor control, and process control. In these applications, the resistance of the device can be used to measure and control various factors such as temperature, pressure, and flow rate. Other applications include current sensing and measuring electrical parameters such as voltage, current, and power.
The J45S 20K rotary potentiometer, rheostat, is a versatile device that can be used in a wide range of applications. Its simplicity and reliability make it a popular choice for a range of consumer, industrial, and control applications. The resistance of the device can be used to measure and control electrical and mechanical parameters, allowing for precise adjustments and measurements.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...