Allicdata Part #: | J50S500-ND |
Manufacturer Part#: |
J50S 500 |
Price: | $ 53.99 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Nidec Copal Electronics |
Short Description: | POTENTIOMETERS |
More Detail: | 500 Ohm 1 Gang Linear Servo Mount Potentiometer No... |
DataSheet: | J50S 500 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
20 +: | $ 49.08180 |
40 +: | $ 41.33210 |
60 +: | $ 38.74880 |
100 +: | $ 37.45710 |
Series: | J |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Taper: | Linear |
Moisture Sensitivity Level (MSL): | -- |
Resistance (Ohms): | 500 |
Tolerance: | ±5% |
Number of Gangs: | 1 |
Built in Switch: | None |
Power (Watts): | 1.5W |
Temperature Coefficient: | ±50ppm/°C |
Number of Turns: | 1 |
Rotation: | Continuous |
Adjustment Type: | User Defined |
Resistive Material: | Wirewound |
Termination Style: | Solder Turret |
Actuator Type: | Round |
Actuator Length: | 0.787" (20.00mm) |
Actuator Diameter: | 0.236" (6.00mm) |
Bushing Thread: | -- |
Mounting Type: | Servo Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats are both useful electronics devices with specific applications, and the J50S 500 is no exception. This particular device can be used to control electrical components in various ways. By establishing a reference voltage or current flow, the J50S 500 can be used to adjust or monitor the behavior of a system.
As a Rotary Potentiometer, the J50S 500 reduces the output current or voltage of an electronic circuit. Potentiometers are often used as voltage dividers, which can be used to adjust the amount of current to be supplied to a circuit. Typically, a circuit’s voltage is adjusted by sliding a rotating wiper across a resistive track, called a potentiometer track. This changing resistance is used to regulate the voltage in the circuit, which is referred to as varying the “potentiometer setting”. The J50S 500 allows this setting to be adjusted with a series of dials.
The J50S 500 can also be used as a rheostat. Rheostats are resistors with variable resistance value, used to control current levels in circuits. The J50S 500, like most rheostats, is capable of adjusting the current flow in a circuit in two ways. The first is by manipulating the resistance, allowing for changes in the circuit’s overall resistance. The second is by the act of varying the voltage in the circuit. This process is known as voltage drop.
In both applications, the device is connected to a circuit\'s power source and a current sensing device is connected to the device. As the current travels through the device, the voltage and the resistance of the rheostat change, allowing the user to adjust the amount of current traveling through the circuit. This method of adjustable current allows for a wide range of applications, including level control, temperature regulation, power supply adjustment, and more.
In conclusion, the J50S 500 is an effective device that can be applied in various ways to monitor and control an electronic circuit. As a potentiometer, the device can be used to adjust the resistance of a circuit, while as a rheostat it can be used to regulate the voltage and current of a circuit. Both applications require the device to be connected to a power source and a current sensing device in order to be effective, and offer a wide range of applications for various uses.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...