JAE-2-31841-1 Circuit Protection |
|
Allicdata Part #: | JAE-2-31841-1-ND |
Manufacturer Part#: |
JAE-2-31841-1 |
Price: | $ 426.25 |
Product Category: | Circuit Protection |
Manufacturer: | Sensata-Airpax |
Short Description: | CIR BRKR MAG-HYDR LEVER |
More Detail: | N/A |
DataSheet: | JAE-2-31841-1 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
3 +: | $ 387.50000 |
Series: | JAE |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Breaker Type: | Magnetic (Hydraulic Delay) |
Moisture Sensitivity Level (MSL): | -- |
Current Rating: | -- |
Number of Poles: | 2 |
Actuator Type: | Lever |
Illumination: | -- |
Illumination Voltage (Nominal): | -- |
Mounting Type: | Panel Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Circuit Breakers are used to protect the wiring and associated components from overloads and short circuits. The JAE-2-31841-1 is a type of Circuit Breaker designed for use in high voltage applications. It is typically used in areas with high electrical loads such as factories and power plants. The JAE-2-31841-1 is designed to quickly interrupt an electrical circuit when an excessive current is detected. It is also designed to withstand the high short-circuit currents that may be present in high voltage installations.
The JAE-2-31841-1 is composed of two main components, the trip unit and the contact arm. The trip unit is a complex set of relays and electronics that detect an inappropriate current and open the contacts of the contact arm in order to interrupt the circuit. The contact arm is a spring-loaded arm that is connected to the trip unit. When an over-current is detected, the contact arm is acted upon by the trip unit, causing it to open the contacts.
The working principle of the JAE-2-31841-1 is based on the inverse time-delay type of protection. This means that when an over-current is detected, the trip unit is designed to open the contact arm at a rate that is dependent on the current. As the current increases, the rate at which the contact arm is opened increases, providing a greater level of protection from high short-circuit currents.
The JAE-2-31841-1 is designed for use in high voltage applications where high short-circuit currents may be present. It is commonly used in industrial settings such as factories, power plants, and other large electrical installations. The JAE-2-31841-1 provides reliable protection from high short-circuit currents and overloads due to its inverse time-delay protection feature. It is also relatively easy to install and maintain.
The specific data is subject to PDF, and the above content is for reference
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A