JLE-2-34371-125 Circuit Protection |
|
Allicdata Part #: | JLE-2-34371-125-ND |
Manufacturer Part#: |
JLE-2-34371-125 |
Price: | $ 447.60 |
Product Category: | Circuit Protection |
Manufacturer: | Sensata-Airpax |
Short Description: | CIR BRKR MAG-HYDR LEVER |
More Detail: | N/A |
DataSheet: | JLE-2-34371-125 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
3 +: | $ 406.91300 |
Series: | JLE |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Breaker Type: | Magnetic (Hydraulic Delay) |
Moisture Sensitivity Level (MSL): | -- |
Current Rating: | -- |
Number of Poles: | 2 |
Actuator Type: | Lever |
Illumination: | -- |
Illumination Voltage (Nominal): | -- |
Mounting Type: | Panel Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Circuit breakers are a vital component in electrical and electronic systems, designed to protect the wiring and components within the system from damage due to an overload of electricity or high current flow. The JLE-2-34371-125 is a type of circuit breaker, which is suitable for both high-voltage and low-voltage applications. It has a working voltage of up to 600 volts and is suitable for use in applications where the AC voltage is between 50 and 600 volts.
The circuit breaker has a design that allows it to open and close automatically in response to an overcurrent situation. This is done by a mechanism that uses thermal and magnetic effects. When the current flow exceeds the specified limit, the heat produced by the current is sensed by the circuit breaker’s thermal overload system. This causes the thermal overload to expand and move a connected switch into the "off" position, thus cutting off the current supply to the circuit.
The JLE-2-34371-125 also features a magnetic overload protection system that is designed to shut off the circuit in case of an over voltage situation. This protection system consists of a magnetic coil that senses an excessive voltage. When the coil detects a voltage level greater than the specified limit, it will activate an internal mechanism that will move the switch into the "off" position to break the circuit and protect the wiring and other components within the system.
This type of circuit breaker is used mainly in high voltage applications and for applications that require a high degree of electrical isolation. It is often used in AC power distribution systems for residential and commercial buildings. It can also be used in motor control circuits for motors that require an external current sensor. In addition, it is often used in high voltage switching systems and for power control systems for electric vehicle charging stations.
When it comes to its working principle, the circuit breaker operates based on the principle of an electronic switch. When the current flow through the circuit exceeds a certain limit, it triggers the switch, causing it to move into the "off" position and cutting off power to the circuit. The circuit breaker also acts like a fuse and is designed to trip when the current flow in a circuit goes beyond a certain level.
Overall, the JLE-2-34371-125 is a reliable and cost-effective circuit breaker that can be used for both high voltage and low voltage applications. It is particularly useful for applications in residential and commercial buildings where AC power distribution is required, and is characterized by its high degree of electrical isolation and reliable operation. It is also a good choice for applications in motor control circuits, electric vehicle charging stations, high voltage switching systems, and power control systems.
The specific data is subject to PDF, and the above content is for reference
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A