JTE-1-1REC4-39554-125 Circuit Protection

Series:	JTE
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	125A
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers are an essential component in any electrical system. They are designed to protect electrical systems from short circuits, overloads, and other electrical faults. The JTE-1-1REC4-39554-125 is a type of circuit breaker that is specially designed for hazardous areas.The JTE-1-1REC4-39554-125 is designed for use in Zone 1 and Zone 2 hazardous area locations. The device has two independent, normally open contacts, and an auxiliary switch that act as a secondary thermal safety device. The circuit breaker is equipped with a manual reset switch and a test button.The JTE-1-1REC4-39554-125’s primary function is to open and close a circuit between two phases. When current flows through the circuit breaker’s contacts, the device will remain closed. The device is designed to break an electrical circuit when a fault or overload occurs. When the fault or overload is detected, the circuit breaker will open to protect the electrical system.The JTE-1-1REC4-39554-125 is also designed to include a sensor that detects a temperature rise in hazardous locations. When the ambient temperature reaches an unsafe level, the circuit breaker will open the circuit to protect personnel from hazardous gases and vapors.The JTE-1-1REC4-39554-125 is designed to have a long service life and requires minimal maintenance. The device is designed to be compliant with DIN standard IEC 8050-1 and meets international safety standards. The device also has overload and short-circuit protection, which helps protect equipment and personnel from electrical damage.The device is designed for installation in hazardous locations and is suitable for use with any type of electrical equipment. It is designed with a trip threshold of 30A, with a maximum current rating of 80A. The JTE-1-1REC4-39554-125 is also designed to be used in ATEX-certified explosion-proof areas.The JTE-1-1REC4-39554-125 is designed with a dual-pole circuit breaker, which allows for the safe switching of two circuits simultaneously. The device has a low power voltage rating of 4.2V and a high power rating of 415V. The device is also equipped with an adjustable trip point, which allows the user to adjust the circuit breaker’s sensitivity.The JTE-1-1REC4-39554-125 is an essential safety device in any electrical system. It is designed for use in hazardous areas and is designed to offer the highest levels of safety and reliability. The device is designed to be easy to install and maintain and is able to detect and open a circuit to protect personnel and equipment from dangerous levels of electricity.

The specific data is subject to PDF, and the above content is for reference