JTE-1-1REG4-40642-125 Circuit Protection |
|
Allicdata Part #: | JTE-1-1REG4-40642-125-ND |
Manufacturer Part#: |
JTE-1-1REG4-40642-125 |
Price: | $ 352.96 |
Product Category: | Circuit Protection |
Manufacturer: | Sensata-Airpax |
Short Description: | CIR BRKR MAG-HYDR LEVER |
More Detail: | N/A |
DataSheet: | JTE-1-1REG4-40642-125 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
3 +: | $ 320.87600 |
Series: | * |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Moisture Sensitivity Level (MSL): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Circuit breakers are essential components of any electrical system. A circuit breaker is an automatically operated electrical device designed to protect an electrical circuit from damage caused by overload or short circuit. The basic purpose of a circuit breaker is to interrupt current flow after a fault is detected and initiate maintenance. In the JTE-1-1REG4-40642-125 application field, the circuit breaker is used to protect a system against overload or short circuit current that may harm equipment, personnel, and operational processes.
The JTE-1-1REG4-40642-125 circuit breaker is a voltage-independent, single-pole, thermal-magnetic, double-break, all-pole, heavy-duty circuit breaker. It combines the thermal and magnetic forces of the two current threshold levels to offer superior performance over standard versions. It is rated for service at 125 Amps and can be used to protect single-phase and three-phase systems of up to 600 Volts. This circuit breaker is equipped with a state-of-the-art electronic trip unit and line contactor that meets the latest ANSI/IEEE specifications.
The JTE-1-1REG4-40642-125 circuit breaker has two operating modes: normal and trip. In normal mode, the circuit breaker acts as a switch and allows a current to flow from the power supply to the load. The trip mode is activated when the current exceeds the preset limit. This mode is triggered by either a thermal or magnetic overload. The thermal overload mechanism responds to an increase in temperature due to an increase in current. The magnetic overload is activated when the current exceeds the preset limit due to an excessive amount of power drawn. The circuit breaker then trips to prevent further damage.
The JTE-1-1REG4-40642-125 circuit breaker provides protection for electrical systems that are exposed to hazardous conditions, such as sparks, dust, moisture, and voltage spikes. It is designed with advanced technologies such as all-pole fault interrupters, differential sensors, and contactors that are able to monitor both inductive and resistive load characteristics. The system also includes a SurgeProt™ protection package that provides extended protection against voltage surges.
The JTE-1-1REG4-40642-125 circuit breaker is designed to offer a reliable and cost-effective solution for protecting most low voltage applications. It is designed to be easy to install, maintain, and operate, and is tested and certified to the highest quality standards. This makes it an ideal choice for a variety of commercial and industrial applications, and enables it to take on the most demanding electrical environments.
The specific data is subject to PDF, and the above content is for reference
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A