JW2-SS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Relay Sockets, also known as JW2-SS, are one of the most widely used and commonly found electrical components in the electronics industry. They are typically used as a switch to connect or disconnect an electrical circuit, or as isolators between two circuits. They are commonly available in two or four pins, and may have either a normally open (NO) or normally closed (NC) contact.

Relay Sockets, broadly speaking, come in two types. First, there are Electro-mechanical Relays that use coil of wire to actuate electrical contacts. These types of Relays usually have a low switching frequency and are considered to have a longer life span, since they are not affected by wear and tear of electrical contacts. The second type is a Solid State Relay (SSR), which utilizes semiconductors to provide a switch-state. It usually has a higher switching frequency than an electro-mechanical relay, and the life span of the switch depends on the reliability of the semiconductor components.

The JW2-SS is a Solid State Relay. It is generally rated as 10A, 250VAC in aeolian sealed contact type, with a maximum breakdown voltage of 5KV. The JW2-SS uses a single bipolar transistor as a switching element, which is driven by a low-power signal. It also uses zero-crossing technology to extend the working life of the contacts. Its low-voltage operation ensures that it can be used in low-voltage applications.

The basics of the working principle are similar to any type of relay, although the implementation is slightly different. The JW2-SS requires a small control signal to turn the relay on or off. The signal is applied to the control port and the transistor switch is activated. This allows the current to flow through the load terminal, which then actuates the contact terminals. The contact terminals are then connected and the circuit is complete. When the control signal is removed, the contact terminals are opened, and the current is interrupted.

The JW2-SS is typically used in a wide range of applications, and is ideal for applications that require low-voltage operation. Most commonly, the JW2-SS is used for controlling motors, lights, and other electrical components. It is also widely used in DC circuits for switching power supplies or battery charging systems. Additionally, the JW2-SS can be used as an isolator in AC circuits for safety purposes.

In conclusion, the JW2-SS is a commonly used Relay Socket. It is a Solid State Relay rated with 10A, 250VAC in aeolian sealed contact type. Its operating principle is similar to other relays, and its main advantage is its low-voltage operation. It can be used to control motors, lights, and battery charging systems, as well as serve as an isolator in AC circuits.

The specific data is subject to PDF, and the above content is for reference