K50-3C0E25.0000M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

K50-3C0E25.0000M oscillator is a direct current or alternating voltage controlled signal generator. The difference between the two is its function. The direct current control signal generator requires the input control power source to be a direct current while the alternating voltage control signal generator requires the controlled power source to be an alternating voltage. To do this, the K50-3C0E25.0000M oscillator converts the varying parameters of the input signal into an alternating current or alternating voltage output signal. By adjusting certain parameters like frequency, amplitude, and duty cycle, this oscillator can generate a variety of output signals.

The oscillator consists of several components, such as a resistor, inductor, capacitor, and transistors. The resistor is used to limit the amount of current flowing into the circuit and provides signal impedance. The inductor, on the other hand, stores energy and is responsible for maintaining a constant frequency throughout the entire operating range of the circuit. The capacitor is needed to store and release energy in order to stabilize the output of the oscillator. Finally, the transistors are used to switch the current and voltage in the circuit so that the output signal is generated in a smooth waveform.

The K50-3C0E25.0000M oscillator is used in many different applications, such as in radio receivers, motor control systems, timers, and frequency counters. In radio receivers, the oscillator is used to generate the alternating current signal needed to power the radio receiver. In motor control systems, the oscillator is used to regulate the speed and position of the motors. Timers are used to switch on and off an electrical load at precise intervals. A frequency counter is a device used to measure the frequency of an electrical signal. Finally, the oscillator can be used in audio electronics to generate tones and control the output volume.

The working principle of the K50-3C0E25.0000M oscillator relies on the fact that when a defined parameters like frequency, amplitude, and duty cycle are kept constant, the output signal will remain constant as well. This is because the oscillator constantly adjusts the amplitude and duty cycle in order to maintain the same frequency of the output signal. The oscillator is also used to generate a low-distortion signal which makes it ideal for applications that require audio-like signals.

In summary, the K50-3C0E25.0000M oscillator is a direct current or alternating voltage controlled signal generator used in many different applications. It consists of several components such as resistors, capacitors, inductors, and transistors. The oscillator operates on the working principle of keeping a defined set of parameters constant in order to generate a low distortion output signal of a consistent frequency. This makes it ideal for audio-like signals and applications that require precise frequency control.

The specific data is subject to PDF, and the above content is for reference