K50-3C0SE16.0000MR

Frequency Stability:	--
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.063" (1.60mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	10mA
Operating Temperature:	-10°C ~ 70°C
Series:	K50-3C, Kyocera
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	16MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are devices used to generate a steady, continuous wave-like voltage signal of a given frequency. The K50-3C0SE16.0000MR Oscillator is a device capable of generating an oscillating signal of which the frequency is modulated as a function of the applied voltage. This oscillator is suitable for a certain range of applications, and its working principle explains how it works.

Application Field

The K50-3C0SE16.0000MR oscillator is suitable for a wide range of applications, from industrial applications to consumer applications. It is designed for applications that need an oscillating waveform of very low noise and high stability, such as digital communications, radio signal transmissions, and testing equipment.In addition, this oscillator is ideally suited for applications that require a stable voltage level for long periods of time, such as the protection of electronic components, or the operation of medical equipment. The K50-3C0SE16.0000MR oscillator is capable of providing a continuous waveform of a given frequency for many years without degradation.

Working Principle

The K50-3C0SE16.0000MR oscillator operates by generating a continuous waveform of a given frequency. This is done by using a voltage-controlled oscillator (VCO) circuit, which is a type of electronic oscillator that will oscillate at a frequency that corresponds to the applied voltage.The VCO circuit consists of two components, an amplifier and a frequency control element, such as a resistor, capacitor, or inductor. In the K50-3C0SE16.0000MR oscillator, the amplifier is built using bipolar transistors, and the frequency control element is a varactor diode.When a voltage is applied to the VCO circuit, the frequency of the oscillation will be determined by the characteristics of the frequency control element. In the case of the K50-3C0SE16.0000MR oscillator, the frequency is determined by the varactor diode, which is a voltage-variable device, meaning that the resistance can be changed with the applied voltage. As the applied voltage increases, the resistance of the diode decreases, thus increasing the frequency of the oscillation.

Conclusion

This is a brief overview of the K50-3C0SE16.0000MR oscillator and its application field and working principle. This oscillator is a device that is suitable for a certain range of applications, and it operates by generating a steady, continuous wave-like voltage signal of a given frequency. Its working principle explains how it is able to do this, using a voltage-controlled oscillator circuit with a frequency control element, such as a resistor, capacitor, or inductor. It is an ideal choice for applications that require an oscillating waveform of very low noise and high stability.

The specific data is subject to PDF, and the above content is for reference