KBPC3501T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are commonly used in power supplies, typically to convert AC to DC power. The KBPC3501T is a popular bridge rectifier which is most often used in AC-DC rectification for lighting, telecommunications, automotive, and other applications. This article will discuss the applications, installation requirements, and working principles of the device.

The KBPC3501T is a 4-terminal metal-case bridge rectifier. It is rated for 35A at 250V, and comes in a variety of form factors from epoxy-molded to heat-sink versions. It is a popular choice for applications such as power supplies for LED lighting, electric vehicles, power tools, automotive electronics, and other power conversion applications.

The device is most often used in systems requiring full-wave (also known as half-bridge) rectification of single-phase AC power. It is designed to be used in a 50/60 Hz line frequency with a maximum output of DC 250V. To install the bridge rectifier, four mounting holes are provided on the base of the device. The four mounting screws must pass through the derating screws, and be connected to the board to ensure secure mounting. The device should be connected to the board with the anode pointing up and the cathode pointing down.

When the bridge rectifier is connected to an AC power source, the internal diode bridge conducts current from the anode to the cathode. The diode bridge limits the amount of current that can flow back through the circuit, thus allowing for a rectified output (DC) voltage waveform. The devices is designed to the 50/60 Hz AC input waveform and provide a filtered and smooth DC output voltage waveform.

The device can also be used in a full-bridge rectifier configuration. In this configuration, two bridge rectifiers are connected in parallel with a center-tapped transformer to allow for full-wave rectification. This configuration allows for higher power output, as it enables more efficient power conversion.

The bridge rectifier is also used in a half-wave, single phase rectifier configuration. This configuration allows for the conversion of the single phase AC power source into a DC output. Two diodes are connected in parallel with the AC power source, and conduct current only when the AC phase is positive, with the output of the diodes presenting a rectified DC voltage waveform.

The bridge rectifier is a very versatile device and can be applied in many different applications. It is important to consider the installation requirements of the device, as well as the working principles to ensure accurate and efficient operation. Once installed correctly and connected to the proper power source, the KBPC3501T can provide reliable DC power in various applications.

The specific data is subject to PDF, and the above content is for reference