KC2520Z12.0000C1KX00 Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are complex electronic components that create and control oscillations. They enable electrical current to flow back and forth in an alternating sequence between two or more points. One of the more commonly used oscillators is the KC2520Z12.0000C1KX00, which comes in a compact size and offers excellent stability and frequency control.

This oscillator is a quartz crystal device that acts as an oscillator circuit. It utilizes a tuned circuitry to generate a stable electrical signal available at its output port. By using the combination of crystal, amplifier, LC tank and other associated components, an LC oscillator is formed. In the case of the KC2520Z12.0000C1KX00, it has a quartz crystal cut along certain angles which helps to set the frequency of oscillations at a constant and specific point.

The KC2520Z12.0000C1KX00 application field mainly covers radio, robotics, and microwave technologies. It is widely used in a variety of equipments, from broadcast receivers to medical imaging equipment. It also works exceptionally well in systems that requires precision frequency control such as test apparatus, instrumentation, communication devices, etc.

In terms of working principle, the KC2520Z12.0000C1KX00 utilizes PLL technology for frequency control. Basically, a frequency-locked loop (PLL) is an electronic control system that uses the combination of negative and positive feedback to generate an output frequency with exact same phase and frequency of the input signal. The signal quality and frequency control is maintained at a very high level by the PLL circuit. In addition, the oscillator circuit includes an LC element (or an LC tank) to determine the frequency of the signal outputted.

When the KC2520Z12.0000C1KX00 is powered up, its resonator vibrates and the signals pass through it to the amplifying stage. And at the same time, the output of the amplifier goes back to the resonator to keep the oscillations going in a continuous loop. This loop continues until the power source is turned off or the signal is interrupted. In addition, the frequency can be adjusted by using special external components such as a clock buffer or a voltage regulator.

In conclusion, the KC2520Z12.0000C1KX00 is a highly efficient and stable quartz crystal oscillator used in radio, robotics, and microwave technologies. It utilizes PLL technology and an LC element to produce a stable electrical signal with precise frequency control. The oscillator is easy to use and maintain and can be configured with external components to adjust its output frequency.

The specific data is subject to PDF, and the above content is for reference