KC3225K33.0000C10E00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

KC3225K33.0000C10E00 oscillator is a common instrument found in many electrical devices. It is an oscillator type device that generates a stable, low-amplitude, high-frequency signal. Most commonly, this type of oscillator is used to generate a frequency signal for radio frequency applications, but it can also be used in a variety of other applications such as clocks, filters, oscillators, and even in analog-to-digital conversion.

In a typical application, the KC3225K33.0000C10E00 oscillator is powered by a DC power source, usually 3 or 5 volts. The oscillator has an internal preset resistance that controls the output frequency. It also includes a capacitor and an inductor, which are both connected at the input of the oscillator. The output of the oscillator is then passed through a crystal filter which filters the signal and further limits its frequency.

As a frequency generator, the KC3225K33.0000C10E00 oscillator is typically used to generate a stable frequency signal for radio-frequency (RF) applications such as transmission of radio signals, as well as for frequency synthesizers used in computers and other electronic devices. The frequency of the generated signal is usually very low compared to other frequency generators and is typically somewhere between 500 Hz to 2.5 MHz. This low frequency signal is then used to modulate the RF signal (or other signal) for transmission over a wireless medium.

The working principle of the KC3225K33.0000C10E00 oscillator is based on a few basic principles of electrical and electronic engineering. An inductor and a capacitor are connected to the power source of the oscillator; these components form the basis of the oscillator circuit. At power up, the capacitor begins to charge and the inductor discharges, creating a current flow. This current flow produces a steady sine wave as the magnetizing force created by the current flow and the inductor’s electric field opposes the capacitor’s stored energy.

The working frequency of the KC3225K33.0000C10E00 oscillator is determined by the value of the internal preset resistance. This resistance controls the signal’s amplitude and carrier frequency, which are then filtered and further limited by the crystal filter. The output of the oscillator can also be varied by changing the value of the input capacitor and/or inductor. In addition, the frequency of the oscillator can be adjusted by either increasing or reducing the value of the internal preset resistance.

Today, KC3225K33.0000C10E00 oscillators are widely used in a variety of different applications, ranging from radio frequency applications to analog-to-digital conversion. They are especially useful in applications where a low frequency, high frequency signal is needed. In addition, they are incredibly cost-effective and reliable. Therefore, they are a popular choice for many device manufacturers for their frequency generation and filtering needs.

The specific data is subject to PDF, and the above content is for reference