KC7050Y200.000P30EZU

Series:	KC7050Y-P30EZU, Kyocera
Packaging:	Digi-Reel®
Part Status:	Obsolete
Base Resonator:	Crystal
Type:	SO (SAW)
Frequency:	200MHz
Function:	Enable/Disable
Output:	LVPECL
Voltage - Supply:	3.3V
Frequency Stability:	±50ppm
Operating Temperature:	0°C ~ 70°C
Current - Supply (Max):	100mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	6-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.051" (1.30mm)
Current - Supply (Disable) (Max):	30µA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

Oscillators are electronic devices that generate a repetitive signal. They consist of both active and passive components, such as filters, amplifiers, transistors, resistors, and capacitors, creating a self-contained circuit. Oscillators are widely used in numerous applications, including radio frequency (RF) transmitters/receivers, sensors, frequency dividers, timer circuits, and digital logic gates.

Types of Oscillators

Oscillators can be divided into two main categories: analog and digital. An analog oscillator is an electrical circuit that produces an analog signal, such as a sine wave or square wave. A digital oscillator, on the other hand, is an electronic circuit that produces a periodic digital signal, such as a pulse wave or sawtooth wave. The output of a digital oscillator is usually controlled by a digital timing circuit.

KC7050Y200.000P30EZU Application Field and Working Principle

The KC7050Y200.000P30EZU is a miniature digital oscillator that has been designed for use in various applications. It generates an output frequency of 200 MHz and has a fine adjustment range of +/-30 ppm. The oscillator can be used in level-sensitive circuits and has a guaranteed a second output level of 10%, minimizing the risk of interference.The KC7050Y200.000P30EZU oscillator uses a PLL (phase-locked loop) system to ensure reliable and precise generation of a frequency signal. This type of digital oscillator contains a voltage-controlled oscillator (VCO) as its primary component. It also contains a phase detector, a low-pass filter, and an amplifier. The VCO produces a periodic signal, which is then fed into the phase detector. The phase detector then compares the phase of the incoming signal to the reference clock and produces a corresponding error voltage. This voltage is then filtered by the low pass filter to produce a DC voltage, which is then used to adjust the VCO frequency. This cause the VCO to be phase-locked to the input signal, thus producing a stable output signal.

Conclusion

The KC7050Y200.000P30EZU oscillator is an excellent choice for frequency generation applications, due to its reliable and accurate output. It can be used in a wide variety of applications such as RF transmitters/receivers, sensors, frequency dividers, timer circuits, and digital logic gates. Furthermore, its PLL system ensures stable and precise generation of a frequency signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description