Allicdata Part #: | KNP-25JR-52-10R-ND |
Manufacturer Part#: |
KNP-25JR-52-10R |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES WW 1/4W 5% AXIAL |
More Detail: | 10 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axia... |
DataSheet: | KNP-25JR-52-10R Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.00979 |
Series: | KNP |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Resistance: | 10 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Wirewound |
Features: | Flame Retardant Coating, Safety |
Temperature Coefficient: | ±300ppm/°C |
Operating Temperature: | -40°C ~ 200°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.098" Dia x 0.248" L (2.50mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors, such as KNP-25JR-52-10R, are widely used components in a variety of electronics and electrical applications. They are a type of passive electronic component that is used to resist the flow of electricity in a circuit. Through hole resistors are typically used in conjunction with other components in order to regulate the voltage, current, and/or power in a circuit.
KNP-25JR-52-10R is a type of through hole resistor. It is made up of an insulating substrate material connected to two flat steel plates, to which a resin is applied. The steel plates are coated with a suitable material such as copper, gold, or silver, in order to control the resistance. The substrate material is preferably made of ceramic or glass, and the thickness of this material influences the resistor\'s ability to dissipate heat. The resistor is then sealed inside a sufficiently heat-dissipating enclosure.
KNP-25JR-52-10R through hole resistor has a maximum power rating of 25W, and a nominal resistance value of 52 Ω & 10 %, respectively. It is designed for use in industrial equipment, consumer electronics, and automotive applications. Its unique construction provides excellent accuracy and stability over wide temperature ranges, as well as maximum vibration resistance during operation.
The working principle of any resistive component such as KNP-25JR-52-10R is essentially the same. The resistor works by limiting the flow of electric current through it. When electric current passes through a resistor, electrical energy is converted into thermal energy. This thermal energy is dissipated into the environment as heat, thus limiting the amount of current that passes through the resistor.
KNP-25JR-52-10R through hole resistor has a wide range of applications in various electronic and electrical circuits. It is mostly used to reduce voltage, current, and/or power in a circuit. It is also used to provide a “bleeder” resistor in high voltage circuits, to equalize potential differences between components, or to provide isolation in circuits. In addition, it is routinely used in automotive applications such as ignition systems, to provide a stable voltage source, and in lighting systems, to limit the current level.
KNP-25JR-52-10R is a reliable and cost-effective through hole resistor. Its excellent thermal performance, high accuracy and vibration resistance make it suitable for a wide range of applications. Through hole resistors are essential components in many circuits and KNP-25JR-52-10R is a perfect choice for use in electronics and electrical applications.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...