KNP-50JB-52-0R91

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as the KNP-50JB-52-0R91, are passive electrical components employed in numerous electrical circuits and are employed for a wide variety of signal, lightening and filtering applications. Through Hole Resistors are commonly employed in circuit boards and comprise of a metal or ceramic plate, on which a resistor element is mounted. This resistor element varies in shape and size and ultimately defines the resistor’s electrical attributes.

In the case of the KNP-50JB-52-0R91, the resistor element comprises of a thin metallic strip when is wound sevral times around a non-conductive spool. The KNP-50JB-52-0R91 is an axial lead resistor, meaning that the leads emerge perpendicularly from the resistor, rather than being bent. The resistance value of any given through hole resistor can vary greatly, however the specific KNP-50JB-52-0R91 is noteworthy for its ability to operate with fine, accurate resistance values of up to an impressive 50/52 ohms.

The wide application field of the KNP-50JB-52-0R91 chiefly depends on its inherently low resistance values. This attribute allows the resistor to be used in various applications including radio frequency (RF) circuitry, signal buffering, noise filtering and current-limiting. The KNP-50JB-52-0R91 is also widely employed to create any reference voltage divider configurations, allowing the user to generate specific voltage outputs.

Typical Construction of the KNP-50JB-52-0R91: The KNP-50JB-52-0R91, like all through hole resistors, is primarily composed of a spool, often referred to as the substrate, on which the resistor element is mounted. In regards to the KNP-50JB-52-0R91, this is achieved by wrapping a thin metal filament or band around the spool. The metal band is insulated with a ceramic coating which is designed to keep the underlying circuitry from being short circuited by the metal strip.

In regards to the construction of the KNP-50JB-52-0R91, the unit itself is much smaller than other models and typically takes the form of an angular, axial component. This is constructed by two disc-shaped ceramic caps which are joined to the metallic band via coaxial leads. These leads protrude from the opposing ends of the resistor and allow the component to make contact with the electrical circuit.

The Working Principle of the KNP-50JB-52-0R91: The KNP-50JB-52-0R91 resistor works on the same principle as any other type of resistor, whereby an electrical current passing through the resistor experiences an oppose voltage drop across the component, resulting in a reduction in current flow. This voltage drop is inversely proportional to the resistance value; meaning that the higher the resistance value of the resistor, the higher the voltage drop.

The KNP-50JB-52-0R91 resistor works by allowing an electrical current to pass through its resistor element. As this current passes through the resistor element, it begins to encounter a gradually increasing resistance value. This increasing resistance value causes the electrical current to decrease as it passes through the resistor. The increasing resistance value effectively creates a voltage drop across the resistor element, causing a reduction in current flow.

The working of the KNP-50JB-52-0R91 is further aided by the use of a ceramic coating which is applied to the resistor element. This ceramic coating helps to dissipate the heat generated by the passing current more effectively. This helps to optimise the efficiency of the resistor and ensures that the device can be used in high power applications without the risk of overheating.

In terms of other methods employed to reduce the heat generated by the KNP-50JB-52-0R91, an additional measure involves the size of the resistor element. Due to the relatively small size of the resistor, it can dissipate its heat more quickly and reduce the overall operating temperature.

In conclusion, the KNP-50JB-52-0R91 is an incredibly versatile and dependable through hole resistor component, capable of providing stable and accurate voltage and current values. This particular type of resistor incorporates features such as an axial lead setup, low resistance values and an efficient ceramic coating. All of these components are ultimately combined to produce an exceptionally efficient and reliable resistor, suitable for use in a wide variety of applications and circuits.

The specific data is subject to PDF, and the above content is for reference