Allicdata Part #: | KTM-WN117A1P-ND |
Manufacturer Part#: |
KTM-WN117A1P |
Price: | $ 329.90 |
Product Category: | Sensors, Transducers |
Manufacturer: | SICK, Inc. |
Short Description: | SEN CONT 12.5MM NPN |
More Detail: | N/A |
DataSheet: | KTM-WN117A1P Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 299.90500 |
Series: | KTM Prime |
Part Status: | Active |
Sensing Method: | -- |
Sensing Distance: | 0.492" (12.5mm) |
Voltage - Supply: | 12 V ~ 24 V |
Response Time: | 32µs |
Output Configuration: | NPN |
Connection Method: | Connector, M8 |
Ingress Protection: | IP67 |
Cable Length: | -- |
Light Source: | RGB LED |
Adjustment Type: | Adjustable |
Operating Temperature: | -10°C ~ 55°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical Sensors are devices that are used to measure light and convert the light into an electrical signal or energy. The KTM-WN117A1P is a type of optical sensor that is used in industrial settings. This device can measure light over a wide range of wavelengths, from ultraviolet to infrared. The working principle behind the KTM-WN117A1P is based on the photoelectric effect. This effect occurs when a photon strikes a solid surface, releasing electrons that can be used to create an electrical current.
In industrial applications, the KTM-WN117A1P is most often used to detect the ambient light levels in a room or area. This information can be used to control lighting systems, turn on or off machines, and even help monitor safety protocols. The device is highly sensitive and can measure very small amounts of light accurately. This makes it perfect for use in areas with unpredictable or changing light levels.
The KTM-WN117A1P is also often used in combination with other optical sensors such as bolometer and thermal sensing technologies. In these applications, the KTM-WN117A1P can help control other systems and fine-tune their performance. For example, it can be used to set the optimal temperature in an area by measuring the amount of infrared radiation present and then adjusting the temperature accordingly.
As with any optical sensor, the KTM-WN117A1P requires careful calibration and maintenance. Its sensitivity can be affected by dust, water, or other substances, and its accuracy needs to be checked regularly. This is especially important in industrial settings, where the accuracy and reliability of the sensor can have a significant impact on productivity.
In summary, the KTM-WN117A1P is an optical sensor that is used in industrial settings to measure ambient light levels. It is based on the photoelectric effect and is used in combination with other sensors to fine-tune systems and optimize performance. The device requires regular calibration and maintenance in order to ensure accurate readings.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM