L17D4K63137

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub, D-Shaped Connectors - Accessories refer to a series of connectors, also known as subminiature connectors which are widely used in the electronics industry for data communication, serial and parallel I/O applications. L17D4K63137 is one of these commonly used connectors in the electronics industry. This article will briefly discuss about the application field of the mentioned connector and its working principle.

The L17D4K63137 is a D-Sub male type with 17 pins, each pin is 4mm in diameter. It is a popular choice for device connections especially in data communication, serial and parallel I/O applications. On one hand, the connector is used to interconnect signal devices in signal transmission. And on the other hand, it is used for shielding connections of data transmission. Moreover, it’s used in electrical instruments and other devices which require a multi-pin connection.

As for the working principle of the connector, it is based on the contact principle of a circular surface with a 4mm diameter. The male terminals of the connector are inserted into the female terminals, achieving the connection between two terminals. The electrical contact between two terminals is realized when two contact surfaces at both sides come into close contact with each other. At the same time, the contact pressure of two contact surfaces is increased to guarantee a reliable electrical contact.

In addition, the connector also has anti-insertion protection; that is, it prevents the male terminals from insertion into the wrong position in the female terminals. This can be achieved by inner locking design of the connector, which makes sure the female terminal contacts the male terminals properly at a more reliable connection. Therefore, it can be used in various applications for device connection without any risk of short circuit or wrong operations.

In a nutshell, the L17D4K63137 is a D-Sub male type with 17 pins, each pin is 4mm in diameter. It is a popular choice for device connections especially in data communication, serial and parallel I/O applications. It is connected with female terminals through the contact principle of a circular surface with a 4mm diameter. Its anti-insertion protection helps prevent the male terminals from being inserted into wrong positions. The reliability of the electrical contact is also ensured by the increased contact pressure of two contact surfaces.

The specific data is subject to PDF, and the above content is for reference