LEA150F-30-J2

Power (Watts):	150W
Approvals:	CE, cURus, TUV
Minimum Load Required:	--
Size / Dimension:	8.74" L x 2.95" W x 1.46" H (222.0mm x 75.0mm x 37.0mm)
Mounting Type:	Chassis Mount
Features:	Universal Input
Operating Temperature:	-20°C ~ 70°C (With Derating)
Efficiency:	87%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	LEA
Current - Output (Max):	5A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	30V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Open Frame
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC/DC ConvertersAC/DC converters play an essential role in power management. By converting alternating current (AC) to direct current (DC), they allow electronic devices to operate more efficiently. The LEA150F-30-J2 is a bridge rectifier AC/DC converter used to convert AC power to DC power.The LEA150F-30-J2 is an isolated, dual-output AC/DC converter. It converts three-phase AC input to DC output on the secondary side. It has three outputs with maximum ratings of 30A each and a nominal output voltage range from 0 to 150 VDC. The LEA150F-30-J2 features a wide range of protection features, including over-voltage, over-current, and short-circuit protection. It also has a power factor correction circuit which reduces input current distortion and enables it to meet harmonic emission requirements.The LEA150F-30-J2 is designed for applications such as power supplies, electric motor drives, uninterruptible power supplies (UPS), and general DC power systems. Its high efficiency and low noise and electromagnetic interference make it suitable for a variety of power supply applications. The working principle of the LEA150F-30-J2 is based on bridge rectification. The bridge rectifier is an electrical circuit consisting of four switches (diodes) arranged in a bridge configuration. When AC voltage is applied to the bridge rectifier, it forms two paths for current flow and creates a DC output between the positive and negative terminals. The bridge rectifier has the advantage of being able to handle large amounts of current and has a fast response time. This allows it to be used for power applications such as motor drives and UPS systems.The LEA150F-30-J2 is designed to be a reliable and cost-effective solution for power supply applications. It can handle a wide range of input voltages and has a high efficiency rating. The built-in protections reduce the risk of overloading and short-circuiting, making it a safe and reliable solution for any power system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description