LEGBX6-1REG4-62-5.50-A-M3-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers provide safety for numerous different electrical applications in everything from residential to commercial to industrial applications. The LEGBX6-1REG4-62-5.50-A-M3-V circuit breaker is a molded case circuit breaker designed to be used in residential buildings to protect wired appliances and lighting from short circuits.

Design

Molded case circuit breakers (MCCB) are designed to automatically create an open or closed circuit based on the current in the circuit. They are installed inside the breaker panel in residential buildings and are usually found at the main disconnect location for the building. The LEGBX6-1REG4-62-5.50-A-M3-V circuit breaker measures 4.4 inches in length, and is 0.87 inches in width. The total weight of the circuit breaker is 1.7 pounds.

Working principle

Molded case circuit breakers work by using bimetal strips. These strips detect current flow and respond by deflecting when the pre-determined current trip level has been reached. The bimetal strips are mounted on a pivot point that is connected to the trip bar. When the current level that set on the circuit breaker is exceeded, the bimetal strips expand due to the amount of current flowing through them. The expansion causes the trip bar to move, which then trips the breaker and interrupts the current flow.

Protection Capacity

The LEGBX6-1REG4-62-5.50-A-M3-V provides a current rating of 6A, and the maximum voltage rating is 120/240V. The thermal magnetic trip setting is 5.5In, and the breaker can handle up to 4800A in a 3 pole arrangement. The molded case circuit breaker has a 10 kA interrupting capacity, making it suitable for residential circuits and applications.

Benefits

Molded case circuit breakers can provide superior protection from shorts circuits and other electrical faults. They are designed to trip quickly when an overload or short circuit is detected, ensuring the safety of people and equipment. Molded case circuit breakers also provide reset capability, allowing it to be reused after it trips. This further increases the safety of the circuit, as the circuit will not be left without power while it is fixed, accomodating multiple trips of the same problem.

Applications

The LEGBX6-1REG4-62-5.50-A-M3-V circuit breaker is designed for residential applications up to 120/240V. It can be used to protect lighting, small motors, and other residential appliances from short circuits and other electrical faults. The circuit breaker is UL listed and CSA approved, and is suitable for both outdoor and indoor applications.

Conclusion

The LEGBX6-1REG4-62-5.50-A-M3-V molded case circuit breaker is designed to provide safety and protection in residential applications up to 120/240V. The circuit breaker utilizes bimetal strips to sense and respond to overloads and shorts, quickly tripping to protect the circuit from damage. The breaker can handle up to 4800A in a 3 pole arrangement, and has a 10 kA interrupting capacity. With UL and CSA listing, the LEGBX6-1REG4-62-5.50-A-M3-V is designed to be safe and reliable in residential applications.

The specific data is subject to PDF, and the above content is for reference