LELK1-1REC4-29475-10

Series:	LEL
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are a vital component in electrical distribution systems. They provide safety protection for circuits by preventing dangerous overloads caused by high currents. Circuit breakers are usually found in electrical substations and terminals. They are used to protect circuits and components from overloading and short-circuiting. The LELK1-1REC4-29475-10 circuit breaker is used in low voltage applications and is constructed of an insulated base with a terminal board.The LELK1-1REC4-29475-10 circuit breaker is designed to protect low voltage circuits from overloading and short-circuiting. It trips when the load current exceeds the pre-set value, breaking the connection between the power supply and the load. This prevents the circuit from being overloaded or short-circuited, which could cause severe damage. The circuit breaker also has an adjustable current limit, which can be set to a higher or lower value.The LELK1-1REC4-29475-10 circuit breaker has a wide range of applications. It is commonly used in low-voltage applications, such as in residential and commercial buildings, industrial facilities and power distribution systems. It is also used in specialty applications, such as for fire protection systems and for controlling circuits in elevators and escalators.The working principle of the LELK1-1REC4-29475-10 circuit breaker is based on the two main components: the thermal element and the magnetic element. The thermal element is a bimetallic strip, which is configured to respond to changes in temperature. When current flows through the circuit breaker, the bimetallic strip heats up and eventually bends or shifts, breaking or opening the circuit. The magnetic element consists of an electromagnet and a contact. The electromagnet interacts with a permanent magnet and when current flows through the circuit breaker, it creates a magnetic field, which attracts the contact. This closes the circuit, allowing current to flow through. If the current becomes too high, the contact is released, opening the circuit and shutting off the power supply.The LELK1-1REC4-29475-10 circuit breaker is an important component in many low voltage applications. It provides safety protection by preventing dangerous overloads due to high currents, and can be set to an adjustable current limit for different applications. This ensures that circuits and components are safe, and that power supply is not interrupted or short-circuited.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description