LELK1-1REC4-32436-1-V

Circuit Breakers

The LELK1-1REC4-32436-1-V is a circuit breaker that provides electrical circuit protection for the safety of both personnel and equipment. It is designed to detect any abnormal changes in the flow of electricity, and then immediately interrupt the circuit to prevent any potential damage from occurring. The device is used in many different applications, from industrial to residential settings, and works in a variety of ways depending on the specific application.To begin, the LELK1-1REC4-32436-1-V has two main components: a circuit breaker and an insulation current sensor. The breaker is the device responsible for cutting off the electricity in the event of an overload, and the current sensor is used to detect the current levels in the circuit. The device is connected directly to the electrical conductors that are carrying the current and is set to a certain level of current, which must be exceeded before the breaker trips.When power is present, the current sensor will read the current levels and will adjust the breaker accordingly. Once the maximum current level is exceeded, the breaker will trip and the electricity is interrupted. The breaker is not just a single part; instead, it consists of three parts – the switch, the coil, and the housing. The switch is the momentary connection that is triggered when the circuit is over-currented, the coil acts as a shielding buffer, and the housing is where the individual components are housed.The LELK1-1REC4-32436-1-V is commonly used in many different applications, ranging from industrial manufacturing to private homes. In industrial applications, the device is usually installed in main supply lines and machinery or equipment, providing protection for personnel and equipment, and preventing any damage from occurring as a result of an unexpected overcurrent. In residential settings, the device is installed in the main power lines and in other locations, such as arc-fault breakers, to protect against complications due to sudden power-outs.The working principle of the LELK1-1REC4-32436-1-V circuit breaker is actually quite simple. When the current detected in the circuit exceeds the breaker’s set level, the switch is triggered and the coil generates an electromagnetic field, which causes the breaker to trip and cut off the electricity. The working principle has remained largely the same since the first circuit breakers were developed in the late 19th century, so it has been tested and proven time and time again to be reliable and effective at protecting personnel and equipment.Overall, the LELK1-1REC4-32436-1-V circuit breaker is an invaluable device, providing efficient and effective protection for both personnel and equipment in a variety of applications. It is important to understand the working principle and application field of the device in order to properly install and configure it for the desired application. With the advancement of technology, newer versions of circuit breakers are being released, but the basic design is still the same as it was over one hundred years ago.