LELK11-1-63-10.0-AF-01-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LELK11-1-63-10.0-AF-01-V is a circuit breaker that has a variety of applications. It is a form of power protection device that is used to disconnect an electrical circuit from power sources in order to prevent short circuits and other hazards in the circuit. It is an integral part of industrial, commercial, and residential electrical power systems. The purpose of a circuit breaker is to protect the equipment and wiring from damage due to overcurrent, overload, or short circuit. Circuit breakers are rated in amperes, and their maximum trip current should not exceed the rated current of the circuit.

Application Field

LELK11-1-63-10.0-AF-01-V circuit breaker is designed to automatically detect and trip on overloads and short circuits. This circuit breaker has two basic types: thermally-operated breakers and electrodynamic-operated breakers. The thermally-operated breaker is what most people are familiar with. These are typically found in residential and commercial applications. Thermally-operated breakers act like a thermostat, using a thermal element as its sensing device. The thermal element senses the amount of current flowing through the circuit in order to trip the breaker when it exceeds a pre-determined setpoint.

Electrodynamic-operated breakers are typically used in industrial circuit protection applications. They use an electro-dynamic operating element as their sensing device and are most commonly found in industrial installations with high voltage and current requirements. These breakers detect electrical changes in the circuit, such as an overload or short circuit, and trip the breaker when they exceed the maximum operating current.

Working Principle

The working principle of the LELK11-1-63-10.0-AF-01-V circuit breaker is based on the principle of electrical heating. The current flowing through the circuit is converted into heat and stored in a thermally-conductive material called a bimetal strip. This strip allows the heat to transfer from one side to the other. The bimetal strip is designed to warp when exposed to heat. When the current reaches a pre-determined limit, the bimetal strip warps and trips the switch which disconnects the circuit.

The LELK11-1-63-10.0-AF-01-V circuit breaker is designed to protect against both overloads and short circuits in the circuit. Overloads occur when too much current is drawn through the circuit for an extended period, resulting in excessive heat which may cause damage to the equipment or wiring. Short circuits occur when there is a direct connection between the hot and neutral wires, which will cause an extreme surge of current and may cause a fire or other damage to the circuit.

The LELK11-1-63-10.0-AF-01-V circuit breaker is rated to trip at a specific current level, which is known as the trip point. This trip point is calculated based on the specific application and the value is adjustable in order to provide the best protection against overloads and short circuits. The trip point can be adjusted in order to provide different levels of protection, depending on the needs of the system.

Conclusion

The LELK11-1-63-10.0-AF-01-V circuit breaker is an important part of any industrial, commercial, or residential electrical system. It provides necessary protection against overloads and short circuits, which can potentially cause a great deal of damage to the equipment and wiring in the circuit. The circuit breaker is rated for a particular current and has an adjustable trip point for different levels of protection. It is a cost-effective and reliable way to ensure the safety of any electrical system.

The specific data is subject to PDF, and the above content is for reference