LELK2-32006-50-V

Circuit breakers are essential components of electrical systems. They are used to protect the system from overload and short circuits. The LELK2-32006-50-V is an example of a compact, non-metallic, air operated circuit breaker. This device is designed to protect electrical systems from overvoltage, overcurrent, and short circuit conditions.

The LELK2-32006-50-V is designed to operate in an open stainless steel enclosure. This is intended to protect the device from the effects of weathering and other external hazards. The device is typically used in hazardous areas where an explosion proof enclosure is required. It has a maximum interrupting capacity of 50 kilo-amps, and a maximum voltage rating of 3200V.

The device is designed to operate as a two-position circuit breaker. When the breaker is switched to the “on” position, it establishes a connection between the line and the load. When the line voltage is above the predetermined set-point, the device will trip and disconnect the load from the line. The device can then be manually reset, or the breaker can be self reset.

The working principle of the LELK2-32006-50-V is based on air pressure. When the line voltage is above the predetermined setpoint, an air pressure switch within the device is triggered. This causes the internal components of the breaker to actuate and trip the connection. When the overload or short circuit is cleared, the pressure switch is reset and the breaker can be manually reset or self-reset.

The LELK2-32006-50-V is a versatile and reliable device for use in a variety of applications, including motor control centers, switchgear and general distribution. The device is UL listed, and has been tested in accordance with standards set forth by IEC and UL. The device is designed to meet the requirements of hazardous areas, and is available with a NEMA 4X enclosure.

The LELK2-32006-50-V is designed to provide superior performance and reliability in a compact and cost-effective package. The device is easy to install and operate, and offers protection of the system against overload, short-circuit and open-circuit conditions. The device is a reliable and cost-effective solution for protecting an electrical system against hazardous conditions.